Difference between revisions of "Tested Phones"
Jump to navigation
Jump to search
Google
(→Huawei) |
(→Huawei) |
||
| Line 153: | Line 153: | ||
| FRD-L19 || 7.0 || 5.X || {{No}} || || {{No}} || || || Report lots of incorrect data | | FRD-L19 || 7.0 || 5.X || {{No}} || || {{No}} || || || Report lots of incorrect data | ||
|- | |- | ||
|Huawei Honor 9 lite || 9.0 | |Huawei Honor 9 lite ||LLD-L31 || 9.0 || || {{Yes}} || {{partial}} || {{Yes}} || || || API 4.2 support. 1-st SIM 4G/3G/2G, 2-nd 2G. Kirin 659 | ||
|- | |- | ||
|Huawei Mate 9 Pro || || 7.0 || 5.X || {{Yes}} || {{No}} || {{Yes}} || || || | |Huawei Mate 9 Pro || || 7.0 || 5.X || {{Yes}} || {{No}} || {{Yes}} || || || | ||
Revision as of 13:32, 31 March 2024
Tested Phones
Here is listed phone what users have tested. We recommend using Android 7+ with API 4.2+ supported phones or Windows 10 Mobile to map data to CellMapper server.
As of October 2021, Cellmapper require Android 4.4.2 (KitKat) or newer See
- Phone Name = Phone Model Name, example: "Samsung Galaxy S6"
- Model Number = Model Number, example GT-I9305
- Android version = Tested Android version, example 4.4.4
- Cellmapper version = Latest tested Cellmapper version
- Support read Band / Freq = Is this phone supported read band and frequency from phone app. Example Samsung Service Mode.
- API 4.2 Support = If your phone supports API 4.2, please use that.
- API 7.0+ Support = If your phone supports API 7.0+, please use that.
- LTE_CA = Cellmapper App can read CA data from mostly Samsung's phones via FieldTestReader.
- B66/71 Bug = Reports wrong frequency for newer LTE bands such as B66/71
- 5G = If model supports 5G but does not return correct information, please say "No". Otherwise leaving it blank.
- More info = More information about specific model
Supported
Alcatel
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | API 7.0+ Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | 5G | More info |
|---|---|---|---|---|---|---|---|---|---|---|
| Alcatel U5 | 5044Y | 6.0 | 5.1.7 | No | No | No | No | No | No | Unrootable. API 4.2 Unsupported. Without API 4.2 this shows and Maps OK but no GSM/UMTS/LTE band locking. Without SIM card it shows UNKNOWN and false signal. Chipset Mediatek MT6737M |
Archos
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | API 7.0+ Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | 5G | More info |
|---|
ASUS
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | API 7.0+ Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | 5G | More info |
|---|
BlackBerry
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | API 7.0+ Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | 5G | More info |
|---|---|---|---|---|---|---|---|---|---|---|
| BlackBerry | BBC100-1 | 7.0.1 | 5.0.8 | Yes |
Essential
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | API 7.0+ Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | 5G | More info |
|---|---|---|---|---|---|---|---|---|---|---|
| PH-1 | PH-1 | 7.1.1, 8.1.0, 9 | 5.X | Yes | Yes |
- All Google Phone's support API 4.2+
- With Android 7.0+ you can also read band infromation from Cell ID API without root.
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | 5G | More info |
|---|---|---|---|---|---|---|---|---|---|
| Nexus 4 | Yes | CM App may not work due to older Android OS 4.2 -> 5.1, Uses Qualcomm APQ8064 Snapdragon S4 Pro | |||||||
| Nexus 5 | Yes | CM App may not work due to older Android OS 4.4 -> 6.0, Uses Qualcomm MSM8974 Snapdragon 800 | |||||||
| Nexus 6 | Yes | CM App may not work due to older Android OS 5.0, Upgrade to 7.1.1, Uses Qualcomm APQ8084 Snapdragon 805 | |||||||
| Nexus 7 (2013) | Yes | CM App may not work due to older Android OS 4.3 -> 6.0, Uses Qualcomm Snapdragon S4 Pro | |||||||
| Nexus 6P | 7.1 | 5.0.6 | Yes | Yes | Partial | With Android 7+ Band reading not need root. Phone shows LTE-A when you download something. | |||
| Nexus 5X | 7.1 | 5.0.6 | Yes | Yes | Partial | With Android 7+ Band reading does not need root. Phone shows LTE-A when you download something. | |||
| Pixel | 7.1 | 5.0.6 | Yes | Yes | Yes | With Android 7+ Band reading does not need root. Doesn't read the SINR on LTE, reports it constantly as 30db. | |||
| Pixel 2/2XL | 8.1 | 5.x | Yes | Yes | Yes | Yes | |||
| Pixel 3/3XL | 10.0 | 5.x | Yes | Yes | Yes | ||||
| Pixel 3a/3aXL | 10.0 | 5.x | Yes | Yes | Yes | ||||
| Pixel 4/4XL | 10.0 | 5.x | Yes | Yes | Yes | ||||
| Pixel 4a | 10.0 | 5.x | Yes | Yes | Yes | ||||
| Pixel 4a 5G/5 | 11.0 | 5.5 | Yes | Yes | Yes | No | As of February 2021, only reports 5G signal quality. As of Android S DP3, 5G Standalone properly reports data (including gNB), however the update rate seems to be a little slow so RSRP may not be completely accurate upon location. | ||
| Pixel 5a 5G | 11.0 | 5.5.2 | Yes | Yes | Yes | Yes | Tested on AT&T n5, generates accurate trails (Android 11 September 2021 Update) |
HTC
- Mostly HTC phone's support API 4.2+
- HTC phone's support band reading from Qualcom modem method (root) and with Android 7.0+ from Cell ID API without root
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | More info |
|---|---|---|---|---|---|---|---|---|
| HTC One_M8 | HTC One_M8 | 6.0 | 5.0.6 | Yes | Yes | With Qualcomm method working (root). LTE Cat4 device. | ||
| HTC One_M9 | EU model | 7.0 | 5.0.8 | Yes | Yes | Without root can read freq data using new API and Android 7.0+. LTE-A Cat6 device. | ||
| HTC One A9 | 6.0 | 4.x | Yes | LTE-A Cat7 (2CA) device. | ||||
| HTC 10 | US model | 8.0 | 5.0.6 | Yes | Yes | Without root can read band data using new API and Android 7.0+. LTE-A (3CA) Cat9 device. | ||
| HTC U Ultra | EU Model | 8.0 | 5.x | Yes | Yes | No | Band reading working without root, LTE-A (3CA) Cat11 | |
| HTC U11 | HTC_U11 | 9.0 | 5.1.1 | Yes | Yes | Band reading working without root, LTE-A (4CA) Cat16 |
Huawei
- Older Huawei phone's not support API 4.2+.
- Huawei with HiSilicon Kirin 960 Chipset should support API 4.2+ and Band reading Android 7.0+
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Dual SIM | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | More info |
|---|---|---|---|---|---|---|---|---|---|
| Huawei 4C | CHC-U01 | 4.4.2 | 5.X | No | No | Newer CM App may not work due to older Android OS 4.4.2, Uses HiSilicon Kirin 620 | |||
| Huawei Ascend Y550 (EU) | Y550-L01 | 4.4.4 | 4.1.6 | No | Newer CM App may not work due to older Android OS 4.4.2, Uses Qualcomm MSM8916 Snapdragon 410 | ||||
| Honor 6 | H60-L04 | 6.0 | 5.4.1 | No | No | Partial | No | Reads bandwidth and band number ok. Signal shows ok. Shows speedtest when doing so. Android 6.0 FW Link API 4.2 NOT Support as this shows 0dbm | |
| Honor 7 | PLK-L01 | 5.0.2 | 4.X | No | Newer CM App may not work due to older Android OS | ||||
| Huawei Honor 8 | FRD-L04 | 8.0 | 5.2.3 | Yes | Yes | Yes | API 4.2 support added in Android 8 update. | ||
| FRD-L19 | 7.0 | 5.X | No | No | Report lots of incorrect data | ||||
| Huawei Honor 9 lite | LLD-L31 | 9.0 | Yes | Partial | Yes | API 4.2 support. 1-st SIM 4G/3G/2G, 2-nd 2G. Kirin 659 | |||
| Huawei Mate 9 Pro | 7.0 | 5.X | Yes | No | Yes | ||||
| Huawei Mate 10 Pro | BLA-L29 | 8.0 | 5.X | Yes | Yes | Yes | Yes | No SNR or Signal Received Strength on Sim 2, but both Sims can be recorded at the same time. | |
| Huawei Mate 20 Pro | LYA-L29 | 9.0 | 9.X | Yes | Yes | Yes | Yes | No SNR or Signal Received Strength on Sim 2, but both Sims can be recorded at the same time. | |
| Huawei Nova 2 | PIC-LX9 | 8.0 | 5.X | Partial | |||||
| Huawei Nova 3i | INE-LX2 | 9.0 | 5.5.1 | Yes | Yes | Yes | Full API 4.2 support for 4G/3G/2G on both SIMs and frequency without root permissions. No SNR or Signal Received Strength on Sim 2, but both Sims can be recorded at the same time. Dual Sim 4G can be turn on with launching the Settings>Wireless & networks>Dual sim settings. | ||
| Huawei P Smart | FIG-LX1 | 9 | 5.5.3 | Yes | No | Yes | |||
| Huawei P8 Lite | PRA-LX1 | 7.0 | 5.0.8 | No | |||||
| Huawei P9 Lite | VNS-L31 | 6.0 | 5.X | No | Sometimes report bad -41 / -43 RSRP on LTE | ||||
| Huawei P9 | EVA-L09 (Eva-L19) | 6.0 (7 BETA) | 4.1.7 / 5.0.6 | No | No | Sometimes Cell ID shows 0 when mapping 2G/3G network. API 4.2+ not working on Android 7 BETA. Chipset based on HiSilicon Kirin 955 | |||
| Huawei P10 | VTR-L29 | 7.0 | 5.X | Yes | Yes | Yes | |||
| Huawei P10 Pro | 8.0 | 5.X | Yes | Yes | Yes | ||||
| Huawei P20 | EML-L29 | 8.1 | 5.X | Yes | Yes | Yes | Yes | No SNR or Signal Received Strength on Sim 2 but, both Sims can be recorded at the same time. | |
| Huawei Y5 | Y560-L01 | 5.1.1 | 4.1.7 | Yes | Yes | Newer CM App may not work due to older Android OS 5.1, Works all new API 2g 3g 4g also without sim , for block 4g only ,is possibile with root with this program Toggle Network Type 5.0 | |||
| Huawei Y6 (2019) | MRD-LX1 | 9.0 | 5.4.1 | Yes | Yes | Do not enable Android 7.0+ support only tick Android 4.2+. Reads 2G/3G/4G ok, LTE bands 1/3/7/8/20, 2CA, NOT Rootable. Mediatek MT6761/Helio A22 | |||
| Huawei Y6 Pro (2015) | TIT-L01 | 5.1 | 5.0.8 | Newer CM App may not work due to older Android OS, Reports incorrect RSRP on 4G | |||||
| Huawei Y6 Pro (2019) | MRD-LX2 | 9.1.0 | 5.5.4 | Yes | Yes | Yes | MediaTek Helio A22; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G on both SIMs w/o root permissions. No SNR or Signal Received Strength on Sim 2, but both Sims can be recorded at the same time. Dual Sim 4G can be turn on with launching the Settings>Wireless & networks>Dual sim settings. | ||
| Huawei Y7 Prime (2018) | LDN-LX2 | 8.0.0 | 5.5.3 | Yes | Partial | Yes | Working perfect in 4G/3G/2G w/o root permissions. 4G/3G/2G on one sim, only 3G/2G on the other, Snapdragon 430. Not tested yet for 4G LTE, needs more testing. |
Infinix
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | 5G | More info |
|---|---|---|---|---|---|---|---|---|---|
| Infinix HOT 30i | Infinix X699 | 12 | 5.6.0 | Yes | Yes | Unisoc Tiger T606. Working perfect in 4G w/o root permissions. Not tested for 3G/2G, though this may need more testing. | |||
| Infinix NOTE 12 | Infinix X670 | 13 | 5.6.0 | Yes | Yes | MediaTek Helio G96; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G w/o root permissions. |
Lenovo
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Support read Bands / Freq | B66/71 Bug | More info |
|---|---|---|---|---|---|---|---|
| Lenovo Tab 3 | Lenovo_TB3-X70L | 6.0 | No | Old API ok | |||
| Lenovo P2 | P2a42 | 7.0 | 5.x | Yes | Yes | Supports Band 2G/3G/4G Frequency reading without root with Android 7. LTE-A (2CA) Cat6 device. | |
| Lenovo K5 play | L38011 | 8.0 | 5.5.4 | Yes | Yes | Full API 4.2 support for 4G/3G/2G and frequency without root permissions. Based on Qualcomm Snapdragon 430 chipset. | |
| Lenovo K6 Note | K53a48 | 7.0 | 5.x | Yes | Yes | LTE Cat4 device, Supports Band 2G/3G/4G Frequency reading without root with Android 7. Seems to have a bug when Language is set to Spanish |
LG
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | 5G | More info |
|---|---|---|---|---|---|---|---|---|---|
| Optimus G | E970 | 4.1.2 | 4.1.1 | No | No | CM App require Android 4.4.2 or newer, Uses Qualcomm APQ8064 Snapdragon S4 Pro XDA Devs | |||
| LG G2 | D802 | 6.x | 5.x | Partial | Partial | Reads only 4G band/freq and only with root. 4.2+ API not working on 2G/3G. | |||
| LG G3 | D850 | 6.x | 5.x | Partial | Partial | Reads only 4G band/freq and only with root. 4.2+ API not working on 2G/3G. | |||
| D855 | 6.x | 5.x | Partial | Partial | Reads only 4G band/freq and only with root. 4.2+ API not working on 2G/3G. | ||||
| LG G4 | H815 | 5.1 - 6.0 | 4.1.5 | Partial | Yes | Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2. Read Bands / Freq With root | |||
| LG K4 (2017) | LG-M160 | 6.0.1 | 5.8 | Yes | No | ||||
| LG Leon 4G | H340N | 5.0 | 4.1.5 | Partial | Yes | Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2. Read Bands / Freq With root | |||
| LG G5 | H820 | 6.x/7.0 | 5.x | Yes | Partial | Bands/freq. requires root on Android 6.x. With Android 7.0+ you can even read band without root for 4G and sometimes 3G (but very inconsistently), but everything is working. | |||
| H830 | 6.X+ | 4.1.7 | Yes | Yes | Partial | With Android 6, dbm are correct on 2G, 3G and 4G (but you cannot read band without root). It maps also without SIM, and has band lock. With Android 7.0+ you can even read band without root for 4G and sometimes 3G (but very inconsistently), but everything is working. | |||
| H850 | Yes | Yes | |||||||
| LG V20 | LG-H918 | 7.0 | 5.X | Yes | Yes | Yes | Report B66 same as B3 | ||
| LG-H990 | Yes | Yes | |||||||
| LG K20V (Verizon) | 7.0 | 5.X | Yes | Yes | |||||
| LG K8 2017 | M200N | 7.0 | 5.X | Yes | Yes | Read Bands / 2G-3G-4G Frequency without root permissions. | |||
| LG Phoenix 2 (AT&T) 2016 | LG-K371 | 6.0/7.0 | 4.x+ | Yes | Yes | Read Bands / 2G-3G-4G Frequency without root permissions. | |||
| LG K30 | LM-X410TK | 7.1 | 5.X | Yes | Yes | Read Bands / 2G-3G-4G Frequency without root permissions. | |||
| LG G7 ThinQ | LM-G710TM | 8.0 | 5.X | Yes | Partial | Partial | Yes | Read only 4G band/frequency without root permissions. Reports B71 as B7 (EARFCN provided by OS is real EARFCN - 65536 / only lowest 16 bits returned) if secondary/additional (CA) cell. B66/B71 reported correctly if primary cell. | |
| LG Watch Urbane 2nd Edition LTE | W200A | 7.1.1 | 5.X | Yes | Yes | Read Bands / 2G-3G-4G Frequency without root permissions. Wear OS device, regular Android APK sideloaded via ADB. Advertising does not work/show up. | |||
| LG Phoenix 4 (AT&T) 2018 | LM-X210APM | 8.1 | 5.X | Yes | Yes | Sold by Walmart. Read Bands / 2G-3G-4G Frequency without root permissions. | |||
| LG G8 ThinQ (AT&T) | LM-G820UM | 10.0 | 5.X | Yes | Yes | Yes | No | Read Bands / 3G-4G Frequency without root permissions. | |
| LG Velvet 5G (MTK) | LM-G900TM | 10.0 | 5.5 | Yes | Yes | Yes | No | No | Reports 5G RSRP for NSA & SA, but does not properly report some 5G gNB's. |
Motorola
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | More info |
|---|---|---|---|---|---|---|---|---|
| Motorola Moto G 4G (2015) | XT1072 | 5.0.2 | 5.X | Partial | 3G reports wrong RSCP. | |||
| Motorola Moto G LTE 2014 | XT1039 | 6.x | 5.x | Partial | Partial | Reads only 4G band/freq data, and only with root. 4.2+API not working for 2G/3G. | ||
| Motorola Moto G Play | XT1609 | 6.0.1 | Yes | |||||
| Motorola Moto G4 Plus | XT1642 (EU) | 6.0.1 / 7.0 | 5.X | Yes | Yes | Reading Dual SIM's, enable API4.2+. Support LTE+3G reading. With Android 7+ Band reading not need root | ||
| XT1644 | 6.0 | 5.x | Partial | Yes | NEW API correct only 2g-4g, 3g dbm not good, dual sim with 4g+2g | |||
| Motorola Charm | MB-502 | 2.2 | 4.1.2 Beta | Yes | Yes | |||
| Motorola Moto E | XT1021 | 5.1 | 5.X | Partial | ||||
| Motorola Moto E 2nd generation LTE | XT1527 (US) | 5.0.1 | 4.1.2 Beta | Yes | Yes | Can map without SIM card with new API | ||
| XT1524 (EU version) | 5.x / 6.x | 4.1.5 | Partial | Yes | NEW API correct only 2g-4g, 3g dbm not good. Root required to read frequency. | |||
| Motorola Moto G 3rd Generation | XT1541 | 6.0.1 | 5.1.7 | Yes | Yes | Requires root for reading bands/frequency data. 2g-3g doesn't report bands. Can map without SIM card with new API but bands/frequency will be missing. | ||
| Motorola Moto G5 | XT1676 | 7.0.0 | 5.x | Yes | Yes | SIM1 4G/3G/2G, SIM2 2G | ||
| Motorola Moto G5 Plus | XT1685 | 7.0.0 | 5.1.2 | Yes | Yes | SIM1 4G/3G/2G, SIM2 3G/2G | ||
| XT1687 | 7.0.0 | 5.1.0 | Yes | Yes | ||||
| Motorola Moto C | XT1754 | 7.0.0 | 5.x | Yes | Yes | SIM1 4G/3G/2G, SIM2 2G - with ROM vers. NRD90M.060 or NRD90M.062 | ||
| Motorola Moto E4 | XT1767 | 7.1.1 | 5.1.2 | Yes | Yes | SIM1 4G/3G/2G, SIM2 3G/2G | ||
| Motorola Moto X (2. Gen) | XT1092 | 7.1.2 | 5.3.0 | Yes | Yes | |||
| Motorola Moto X4 | 1900-7 (EU Dual SIM) | 8.0.0 | 5.1.7 | Yes | Yes | Yes | one SIM 2G/3G/4G the other: 2G/3G | |
| XT1900-6 | 7.1 | 5.1.7 | Yes | Yes | Yes |
Nokia
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | More info |
|---|---|---|---|---|---|---|---|---|
| Nokia 2 | TA-1029 (Dual-SIM) | 7.1.1 | 5.X | Yes | Yes | Root not required; SIM1 4G/3G/2G, SIM2 3G/2G | ||
| Nokia 2.1 | TA- | 10.0 | 5.X | Yes | Yes | SIM 1 2G/3G/4G, SIM 2 2G,3G, Root not required. LTE Cat4 | ||
| Nokia 3 | TA- | 7.0 | 5.X | LTE Cat4, Mediatek MT6737 | ||||
| Nokia 3.1 | TA-1053 | 10.0 | 5.X | Yes | Yes | LTE Cat4 | ||
| Nokia 5 | TA-1053 | 7.1 | 5.X | Yes | Yes | LTE Cat4 | ||
| Nokia 6.1 Plus | TA-1083 (India) | 10 | x.x | LTE Cat4, 4G Bands and Combos | ||||
| Nokia 7.1 | TA-1095 | 10.0 | 5.4 | Yes | Yes | Both SIMs 4G/3G/2G, LTE-A (2CA) Cat6 4G Bands and Combos | ||
| Nokia 8 | TA-1004 | 8.0 | 5.X | Yes | Yes | Yes | Root not required, LTE-A (3CA) Cat9, 4G Bands and Combos | |
| Nokia 8.3 | TA-1243 | 11 | x.X | Needs more testing! LTE-A (4CA) Cat18, See 4G/5G Bands and Combos | ||||
| Nokia X20 | TA-1314 | 11 | x.X | Needs more testing! 4G/5G Bands and Combos |
OnePlus
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Dual SIM | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | More info |
|---|---|---|---|---|---|---|---|---|---|
| OnePlus One | 5.1 / 4.4 | 4.X | Yes | Yes | API 4.2 not working Android 5.0, but works on 4.4, 5.1+ | ||||
| OnePlus Two | A2003 | 6.0.1 | 5.X | Yes | Partial | No | No | 3G on the first sim shows a wrong dbm value of -51 | |
| OnePlus Three / 3T | A3003 | 6.0.1 / 7.X | 5.X | Yes | Yes | Yes | Yes | Without root can read band data using new API and Android 7.0+. OnePlus battery saving may close app when you turn screen off. This is not CellMapper bug. | |
| OnePlus X | ONE E1003 | 5.X.X | 4.1.6 | Partial | No | ||||
| OnePlus 5 | 7.X | 5.1.1 | Yes | Yes | Yes | Yes | Band reading working without root. | ||
| A5000 | 8.1.0 | 5.2.6 | Yes | Yes | Yes | Yes | All functionality mentioned in table works with LineageOS 15.1. For Dual SIM functionality, records up to 4G/3G/2G for primary SIM and 3G/2G for secondary SIM due to chipset limitation. Secondary SIM MNC recorded incorrectly (as the MNC of the primary SIM's network), even when MNC of secondary SIM's network is not the primary SIM network's MNC, correct MNC for secondary SIM recorded only when primary SIM is disabled. "Record Neighbor Cells" works partially, but will return 214783647/65536/-1 for some fields such as MNC/MCC/TAC/LAC for non-connected cells. Does not require root but location services have to be enabled to read full band/frequency data. | ||
| 9.0 | 5.2.7 | Yes | Yes | Yes | Yes | All functionality mentioned in table works with LineageOS 16.0. For Dual SIM functionality, records up to 4G/3G/2G for primary SIM and 3G/2G for secondary SIM due to chipset limitation. Secondary SIM MNC recorded incorrectly (as the MNC of the primary SIM's network), even when MNC of secondary SIM's network is not the primary SIM network's MNC, correct MNC for secondary SIM recorded only when primary SIM is disabled. "Record Neighbor Cells" works partially, but will return 214783647/65536/-1 for some fields such as MNC/MCC/TAC/LAC for non-connected cells. Does not require root but location services have to be enabled to read full band/frequency data. | |||
| OnePlus 5T | 8.1 | 5.1.5 | Yes | Yes | Yes | Yes | Band reading working without root. | ||
| OnePlus 6 | A6003 | 8.1 | 5.1.7 | Yes | Yes | Yes | Yes | No | Both SIMs 4G/3G/2G. Band reading working without root. |
| OnePlus 6T | A6013 | 9.0 | 5.2.6 | Yes | Yes | Yes | Yes | No | Both SIMs 4G/3G/2G. Band reading working without root. Must lock app to remain recording. Random gaps in trails recorded even when locked app. |
| OnePlus 7, 7 Pro | 9.0 | 5.3 | Yes | Yes | Yes | Yes | No | ||
| OnePlus 7T | HD1903 | 10.0 | 5.3 | Yes | Yes | Yes | No | Both SIMs 4G/3G/2G. Band and LTE Downlink Bandwidth reading working without root. | |
| OnePlus 8 Pro | IN2023 | 10.0 | 5.4.3 | Yes | Yes | Yes | Both SIMs 4G/3G/2G. Maps LTE+NR tiles from eNB | ||
| OnePlus Nord | AC2003 | 11.0 | 5.5.2 | Yes | Yes | Yes | Yes | Both SIMs 4G/3G/2G. Maps LTE+NR tiles from eNB |
OPPO
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | API 7.0+ Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | 5G | More info |
|---|---|---|---|---|---|---|---|---|---|---|
| Oppo A3s | CPH1803 | 8.1.0 | 5.5.4 | Yes | Yes | No | Full API 4.2 support for 4G/3G/2G and frequency without root permissions. Based on Qualcomm Snapdragon 450 chipset. | |||
| Oppo A5 (2020) | CPH1931 | 10 | 5.5.3 | Yes | Yes | No | Dual SIM, 2G/3G/4G, Without SIM card it reads 2G GSM | |||
| CPH1933 | 11 | 5.5.4 | Yes | Yes | No | Full API 4.2 support for 2G/3G/4G on both SIMs. Without SIM card it reads 2G GSM. Based on Qualcomm Snapdragon 665 chipset. | ||||
| Oppo A7 | CPH1903 | 8.1.0 | 5.5.4 | Yes | Yes | No | Full API 4.2 support for 4G/3G/2G and frequency without root permissions. Based on Qualcomm Snapdragon 450 chipset. | |||
| Oppo A15 | CPH2185 | 10 | 5.5.4 | Yes | Yes | No | MediaTek Helio P35; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G on both SIMs w/o root permissions. | |||
| Oppo A15s | CPH2179 | 10 | 5.5.4 | Yes | Yes | No | MediaTek Helio P35; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G on both SIMs w/o root permissions. | |||
| Oppo A16 | CPH2269 | 11 | 5.5.4 | Yes | Yes | No | MediaTek Helio G35; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G on both SIMs w/o root permissions. | |||
| Oppo A16K | CPH2349 | 11 | 5.5.4 | Yes | Yes | No | MediaTek Helio G35; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G w/o root permissions. | |||
| Oppo A53 (2020) | CPH2127 | 12 | 5.5.4 | Yes | Yes | No | Full API 4.2 support for 2G/3G/4G on both SIMs. Based on Qualcomm Snapdragon 460 chipset. | |||
| Oppo A54 | CPH2239 | 10 | No | Beware this model is based on a Mediatek MT6765 Helio P35. | ||||||
| Oppo A54 5G | CPH2195 | 11 | 5.5.3 | Yes | Yes | Yes | Yes | Dual SIMs read 2G/3G/4G/5G (NR SA/NSA), Reads LTE Downlink Bandwith MHz, LTE+NR, LTE-A. Displays only NSA NR Signal only. | ||
| 12 | 5.5.4 | Yes | Yes | No | Yes | Since upgrading to Android 12 (ColourOS) LTE-A and LTE+NR does not display in app! | ||||
| Oppo A74 | CPH2219 | 11 | 5.5.3 | Yes | Yes | Yes | No | Full API 4.2 support for 4G/3G/2G on both SIMs and frequency without root permissions. Not tested API 7.0 support. Based on Qualcomm Snapdragon 662 chipset. | ||
| Oppo A74 5G | CPH2263 | 11 | Yes | Identical/Same as the OPPO A54 5G but with fewer 4G LTE bands. Not tested but everything should work the same as the A54 5G. | ||||||
| Oppo A92 | CPH2059 | 11 | 5.5.4 | Yes | Yes | No | Full API 4.2 support for 4G/3G/2G and frequency without root permissions. Based on Qualcomm Snapdragon 665 chipset. | |||
| Oppo A94 | CPH2203 | 11 | 5.5.4 | Yes | Yes | No | MediaTek Helio P95; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G on both SIMs w/o root permissions. | |||
| Oppo F5 | CPH1723 | 7.1.1 | 5.6.0 | Yes | Yes | No | MediaTek Helio P23; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G w/o root permissions. 4G/3G/2G on one sim, only 3G/2G on the other. | |||
| Oppo F7 | CPH1819 | 10 | 5.6.0 | Yes | Yes | No | MediaTek Helio P60; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G w/o root permissions. | |||
| Oppo R11 | CPH1707 | 8.1.0 | 5.5.4 | Yes | Yes | No | Full API 4.2 support for 4G/3G/2G and frequency without root permissions. Based on Qualcomm Snapdragon 660 chipset. |
Oukitel
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Dual SIM | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | More info |
|---|---|---|---|---|---|---|---|---|---|
| Oukitel K600 Pro | K6000_Pro | 6.0 | 5.0.8 | ||||||
| Oukitel K10000 | 6.0 | 5.0.9 | Yes |
realme
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | 5G | More info |
|---|---|---|---|---|---|---|---|---|---|
| realme C2 | RMX1941 | 9 | 5.6.0 | Yes | Yes | No | MediaTek Helio P22; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G w/o root permissions. | ||
| realme C12 | RMX2189 | 11 | 5.6.0 | Yes | Yes | No | MediaTek Helio G35; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G w/o root permissions. | ||
| realme C21Y | RMX3261 | 11 | 5.5.3 | Partial | Yes | No | Reports that the API doesn't work for 3G, but works for 2G/4G. Based on Unisoc T610 chipset, though this may need more testing. | ||
| Realme 8 5G | RMX3241 | 12 | Yes | Yes | Based on MediaTek Dimensity 700. Needs more testing, Chipset supports 5G NSA mapping. | ||||
| RMX3241GDPR | 12 | Yes | |||||||
| realme X | RMX1901 | 11 | 5.5.4 | Yes | Yes | No | Full API 4.2 support for 4G/3G/2G on both SIMs and frequency without root permissions. Based on Qualcomm Snapdragon 710 chipset. |
Samsung
- For Snapdragon chipset devices, you can easily unlock all bands supported by the hardware instead of being limited to only the ones your carrier allows. For more information see this XDA post.
- You can lock bands on most newer Samsung phones in ServiceMode (not tested on MediaTek chipset devices) by dialing *#2263# in the stock dialer app.
- For US devices, 5G NSA band detection is dependent on CSC.
- Most Samsung Phones do not support Cell ID API 4.2 before Android 8. If you use a stock or custom Samsung Experience ROM (TouchWiz/OneUI) based on Android 8.0 "Oreo" or later, please use the Android 4.2+ CellID API. Note: This may not work on custom Samsung Experience ROMs ported from other devices than your own, or based on newer versions of Android than is officially available in stock Samsung Experience updates for your device. If you use a custom Samsung Experience ROM, please make sure it is based upon an official Samsung Experience stock ROM from your device model. Custom ROMs not based upon stock, such as LineageOS or ResurrectionRemix may not work for the 4.2+ CellID API.
- In some devices Cell ID API 4.2 may show extra data compared to the old API, but most important parameters are invalid or missing. Do not use Cell ID API 4.2 for cellmapping, if the chart below displays your device incompatible. Failing to do so may cause invalid data being displayed on the map.
- To force 2G/3G/4G LTE only mode on samsung phones, The easy way is an app called Advanced Signal Status however on certain samsung phones with 4.4.4 KitKat or newer, including Lollipop 5.x, it is also possible by dialing *#*#4636#*#*, then Device Information, and "Set preferred network type". This may require root on certain carriers. Tested and does not require root on AT&T (310-410).
- To force an LTE Band on Samsung phones running 4.4.4, It is possible by dialing *#0011# > Back > INPUT type Q > INPUT 0000 wait for 15 seconds then you into Band Mode.
- Most Samsung phones can be rooted with CF-Auto-Root 2G/3G/4G bands can be locked using Network Signal Guru but only with most qualcomm chipset. Remember to set "Read qualcomm LTE data (root) under cellmapper app settings, exit and reload cellmapper and allow permissions for cellmapper.
- (Warning: feature deprecated since 5.1.4) Most Samsung phones support reading bands and frequency when Service Mode (*#0011#) is active. Using this feature you need to run Cellmapper in the background and have Service Mode in the foreground. That feature working with root and without. Please check manual here.
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | 5G | More info |
|---|---|---|---|---|---|---|---|---|---|
| Samsung Galaxy K Zoom | SM-C115 | 4.4.2 | 4.1.1 | No | May report incorrect TAC on LTE | ||||
| Samsung Galaxy Ace Style LTE | SM-G357FZ | 4.4.4 | 4.1.4 | No | |||||
| Samsung Galaxy Ace 4 LTE | SM-G357FZ | 4.4.4 | 4.1.1 | No | Root and service mode running foreground needed | In some occasions rooted device may report some invalid data if the API 4.2 is enabled. | |||
| Samsung Galaxy Note 4 | SM-N910F | 6.0.1 | 4.1.4 | No | |||||
| Samsung Galaxy S3 Mini | GT-I8190N | 4.3 | 4.0.8 | No | No | Report bad data on Stock Rom | |||
| Samsung Galaxy S3 4G | GT-I9305 | 4.4.4 | 4.1.1 | No | Yes | Cellmapper Field Test Reader and with root working | |||
| Samsung Galaxy S4 | GT-I9506 | 5.0.1 | 4.1.1 | No | Not tested | ||||
| GT-I9505 | No | Not tested | |||||||
| Samsung Galaxy S5 | SM-G900A | 5.1.1 | 4.1.2 beta | Partial | Root and service mode running foreground needed | ||||
| SM-G900I | Partial | ||||||||
| SM-G9006V | 6.0.1 | 5.4.5 | Partial | Partial | Root and service mode running in foreground needed for UMTS & LTE bands only. Doesn't read 2G bands regardless of root or not. | ||||
| Samsung Galaxy S5 Neo | SM-G903F | 6.X | 4.1.6 | Yes | Yes | ||||
| Samsung Galaxy S6 | SM-G920F | 6.0.1 | 4.1.6 | Partial | Yes | Yes | Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem - service mode running foreground needed | ||
| Samsung Galaxy S6 Edge+ | SM-G928F | 6.0.1 | 4.1.6 | Partial | Yes | Yes | Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem - service mode running foreground needed | ||
| Samsung Galaxy S7 | SM-G930F | 8.0.0 | 5.1.7 | Yes | Yes | Yes | Full API 4.2 support as of Android Oreo update. Older Android has only partial API 4.2 support. 2g-3g update cell info very infrequently and most of the times reports -51 dBm and no band info regardless of Android version. | ||
| Samsung Galaxy S8 | 7.0 | 5.0.9 | Partial | Yes | Yes | Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem | |||
| Samsung Galaxy S8+ | SM-G955FD | 8.0.0 | 5.2.4 | Partial | Yes | Yes | Full API 4.2 support for 4G Only as of Android Oreo update. 2g-3g old -51 dBm API bug as for all Exynos based models. | ||
| Samsung Galaxy S9 | SM-G960F | 10 | 5.5.3 | Yes | Yes | Enable use Android 7.0+ Cell ID API and Record neighbor cells this maps 4G fine. Records 5G DCNR Status fine. Not tried 2G/3G. | |||
| Samsung Galaxy S10 5G | SM-977B | 10.0 | 5.3.1 | Partial | Yes | Yes | Yes | Only Exynos version supported record 5G tiles: See | |
| Samsung Galaxy S21 5G (US) | SM-G991U | 13.0 | 5.6.0 | Yes | Yes | Yes | Works perfectly, LTE TA shown, and everything maps without any obvious problems. | ||
| Samsung Galaxy S21 Ultra 5G | SM-S998U1 | 13.0 | 5 beta | Not tested | Not tested | Not tested | Not tested | ||
| Samsung Galaxy S22 Ultra | SM-S908U | 13.0 | 5.6.0 beta | Yes | Yes | Yes | 2G/3G seems to work okay. LTE TA not reported by device. NR SA works. | ||
| SM-S908B/DS | 13.0 | 5.6.0 | Partial | Yes | Yes | Yes | Samsung Exynos 2200. Working perfect in 5G/4G w/o root. 5G/4G on one sim, only 4G on the other. Not tested for 3G/2G. LTE TA not reported by device, though this may need more testing. | ||
| Samsung Galaxy S23 | SM-S911B | 13.0 | 5.6.0 | Yes | Yes | Yes | LTE TA and CQI not reported by device. | ||
| Samsung Galaxy Xcover 3 | SM-G388F | 5.1.1 | 4.1.1 | No | Not tested | ||||
| Samsung Galaxy Core Prime | SM-G360F (EU) | 5.0.2 | 5.4.1 | Yes | Yes | Root needed i used CF-Auto-Root 4G/3G/2G bands can be locked using Network Signal Guru (Tested with version 2.11.2) once rooted, However without rooting it can still be used with basic information. 4G LTE bands supported 1(2100)/3(1800)/7(2600)/8(900)/20(800), LTE Cat4 Device. | |||
| SM-G360FY (India) | 4.4.4 | 4.1.2 | No | ||||||
| Samsung Galaxy A5 2015 | SM-A500FU | 6.0.1 | 5.0.7 | Partial | No | Didn't tried with root. Without root, 4G looks like ok, but 3G shows wrong dBm. | |||
| Samsung Galaxy A5 2017 (EU) | SM-A520F | 6.0.1 | 5.X | Partial | No | ||||
| Samsung Galaxy A5 (2017) | SM-A520F | 8.0.0 | 5.X | Partial | Yes | Yes | Full API 4.2 support for 4G Only as of Android Oreo update. 2g-3g old -51 dBm API bug as for all Exynos based models. | ||
| Samsung Galaxy A05s | SM-A057F/DS | 14 | 5.6.1 | Partial | Yes | No | API 4.2 on 4G works ok, but has some issues on 3G/2G. Reads LTE SNR and LTE TA ok. LTE_CA is not supported. Based on a Snapdragon 680 4G | ||
| Samsung Galaxy A13 | SM-A135F | 13 | 5.6.0 | Yes | Yes | (Not tested) | API 4.2 seems to work fine on 4G/2G, but 3G is not tested. This phone may need more testing. | ||
| Samsung Galaxy A13 5G (US) | SM-A136U | 13 | 5.5.4 | Yes | Yes | Yes | Yes | Displays lots of NSA info NR SS, NR PCI, Band Name/Name and RFCN | |
| Samsung Galaxy A14 | SM-A145F/DSN | 13 | 5.6.0 | Partial | Yes | Yes | Samsung Exynos 850. Working perfect in 4G w/o root. Not tested for 3G/2G, though this may need more testing. | ||
| Samsung Galaxy A20s | SM-A207 | 10.0 | 5.5.3 | Yes | Yes | Yes | Full API 4.2 support for 4G/3G/2G w/o root. In some rare occasions, API 4.2 may report additional extra data and no band infomation on 2G/3G if enabled API 4.2. Does not require root but location services have to be enabled to read full band/frequency data. | ||
| Samsung Galaxy A23 | SM-A235F | 14 | 5.6.1 | Partial | Yes | API 4.2 works fine on 4G, but has the same RSCP bug on 3G and ARFCN disappearance bug on 2G. Since this has a Snapdragon chipset, it reads LTE RSSI and TA just fine. LTE_CA needs more testing. Reads LTE SNR properly on API 4.2 since One UI 6. Based on a Snapdragon 680 4G. | |||
| Samsung Galaxy A30 | SM-A305GN | 10.0 | 5.5.3 | Partial | Yes | Yes | Reads only 4G band/freq data on both SIMs. API 4.2+ reads -51 dBm and additional extra data on 2G/3G if enabled API 4.2. API 4.2 bug as for all Exynos based models. Does not require root but location services have to be enabled to read full band/frequency data. | ||
| SM-A305G | 11.0 | 5.5.3 | Partial | Yes | Yes | Full API 4.2 support for 4G Only. 2g-3g old -51 dBm API bug as for all Exynos based models. | |||
| Samsung Galaxy A33 5G | SM-A336E | 14 | 5.6.1 | Partial | Yes | Yes | API 4.2 works fine on 4G, but has a -24 dBm RSCP bug on 3G, plus ARFCN seems to disappear on some 2G towers. Also shows a lot of 5G NSA info. Since One UI 5.1, 5G NSA connection becomes very intermittent. Phone supports LTE_CA, but doesn't seem to read it on Cellmapper? Reads LTE SNR properly on API 4.2 since One UI 6. | ||
| Samsung Galaxy A50 | SM-A505G | 11.0 | 5.5.3 | Partial | Yes | Yes | Full API 4.2 support for 4G Only. 2g-3g old -51 dBm API bug as for all Exynos based models. LTE_CA (LTE-A) detection does not always work with dual sim as of 5.5.3. | ||
| Samsung Galaxy A51 | SM-A515F/DSM | 13 | 5.6.0 | Yes | Full API 4.2 support for 4G Only. 2g-3g old -51 dBm API bug as for all Exynos based models. | ||||
| Samsung Galaxy Tab A (2018, 10.5) | SM-T595 | 8.1.0 | 5.2.4 | Yes | Yes | Yes | Working perfect in 2G/3G/4G w/o root | ||
| Samsung Rugby LTE | SGH-I547C | 4.1.2 | 4.1.4 | No | Yes | Root and service mode running foreground needed. Bands can be forced with *#BAND# | |||
| Samsung Galaxy Alpha | SM-G850F | 5.0.2 | 5.0.7 | Partial | Yes | Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem - service mode running foreground needed | |||
| Samsung Galaxy J3 | SM-J320FN | 5.1.1 | 5.3.0 | Yes | Yes | Working perfectly in 2G/3G w/o root. Not tested yet for 4G | |||
| SM-J320G | Yes | Yes | Working perfectly in 2G/3G/4G w/o root. | ||||||
| Samsung Galaxy J4 | SM-J400M | 8.0.0 | 5.2.7 | Yes | Yes | Working perfectly in 2G/3G w/o root. Not tested yet for 4G | |||
| Samsung Galaxy J8 | SM-J810Y/DS | 9.0 | 5.5.3 | Yes | Yes | Yes | Full API 4.2 support for 4G/3G/2G on both SIMs w/o root. Based on Qualcomm Snapdragon 450 chipset. |
Sony
- Mostly Sony Phones support API 4.2
- Some phones can read Bands / Frequency on Field Test Mode ( *#*#*386#*#* or *#*#*585*0000#*#* ). If not opening, you need install apk file (Please search on Google more information).
- Sony XZ Global see supported bands: *#*#7378423#*#*
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | More info |
|---|---|---|---|---|---|---|---|---|
| Sony Xperia E3 | D2203 | 4.4.4 | 4.1.1 | Yes | Partial | Reading Bands/Freq needs to have field test mode is running. LTE Cat4 device. | ||
| Sony Xperia M5 | E5603 | 6.0.1 | 4.1.6 | Yes | LTE Cat4 device. | |||
| Sony Xperia Z | C6602 | 5.1.1 | 5.1 | Yes | No | LTE Cat3 device. Upgradable to 5.1.1 | ||
| Sony Xperia Z3 Compact | D5833 | 6.0 | 5.1.7 | Yes | Partial | LTE Cat4 device. Reads Bands/Freq only with rooted device. | ||
| Sony Xperia Z3 | D6603 | 6.0 | 4.1.2 Beta | Yes | LTE Cat4 device. | |||
| Sony Xperia Z5 Compact | E5803 / E5823 | 7.1.1 | 5.X | Yes | Yes | With Android 7+ can read band data without root | ||
| Sony Xperia Z5 | E6653 | 7.1.1 | 5.1.5 | Yes | Yes | Yes | LTE-A Cat6 device. | |
| Sony Xperia Z4v | SOV31 (KDDI Japan) | 7.0 | 5.1.5 | Yes | Yes | LTE-A Cat6 device. | ||
| Sony Xperia X Compact | F5321 | 8.0 | 5.5.2 | Yes | Yes | Special: can sample MOCN with correct MNC. | ||
| Sony Xperia XA | F3111 | 7.0 | 5.1.1 | Yes | No | LTE Cat4 device. | ||
| Sony Xperia XZ | F8331 (EU) | 8.0 | 5.x | Yes | Yes | Yes | LTE-A (3CA) Cat9 | |
| Sony XZ Premium | G8142 | 9.0 | 5.x | Yes | Yes | Yes | LTE-A (2CA) Cat16 | |
| Sony XZ1 | 9.0 | 5.x | Yes | Yes | Yes | LTE-A (4CA) Cat16 | ||
| Sony XZ2 Compact (Dual-SIM) | H8324 | 9 | 5.2.3 | Yes | Yes | Yes | LTE-A (4CA) Cat15 | |
| Sony XZ2 (Dual-SIM) | H8266 | 9 | 5.2.1 | Yes | Yes | Yes | LTE-A (5CA) Cat18 | |
| Sony Xperia 1 | J9110 | 9 | 5.3 | Yes | Yes | Yes | LTE-A Cat19 device. | |
| Sony Xperia 10 II | XQ-AU52 | 11 | 5.5.0 | Yes | Yes | LTE-A Cat11 device. |
Tecno
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | 5G | More info |
|---|---|---|---|---|---|---|---|---|---|
| TECNO SPARK Go 2023 | TECNO BF7 | 12 | 5.6.0 | Yes | Yes | MediaTek Helio A22; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G on both SIMs w/o root permissions. | |||
| TECNO SPARK 10C | TECNO K15k | 12 | 5.6.0 | Yes | Yes | Unisoc Tiger T606. Working perfect in 4G on both SIMs w/o root permissions. Not tested for 3G/2G, though this may need more testing. |
vivo
- Some model maybe not working or not support API 4.2+.
- On some phones, it is possible to band lock by launching the NetworkState app via Activity Launcher or QuickShortcutMaker. This may or may not work on newer phones and you may have to enter the last 6 numbers of your phone's IMEI number.
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | 5G | More info |
|---|---|---|---|---|---|---|---|---|---|
| vivo V11 (V11 Pro) | vivo 1804 | 10 | 5.5.4 | Yes | Yes | No | Full API 4.2 support for 4G/3G/2G on both SIMs and frequency without root permissions. Based on Qualcomm Snapdragon 660 chipset. | ||
| vivo V15 | vivo 1819 | 11 | 5.5.4 | Yes | Yes | No | MediaTek Helio P70; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G on both SIMs w/o root permissions. | ||
| vivo V21e | V2061 | 12 | 5.5.4 | Yes | Yes | No | Full API 4.2 support for 4G/3G/2G on both SIMs and frequency without root permissions. Based on Qualcomm Snapdragon 720G chipset. | ||
| vivo V27e | V2237 | 13 | 5.5.4 | Yes | Yes | No | MediaTek Helio G99; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G w/o root permissions. | ||
| vivo Y02s | V2203 | 12 | 5.6.0 | Yes | Yes | No | MediaTek Helio P35; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G on both SIMs w/o root permissions. | ||
| vivo Y11 (2019) | vivo 1906 | 11 | 5.5.4 | Yes | Yes | No | Full API 4.2 support for 4G/3G/2G on both SIMs and frequency without root permissions. Based on Qualcomm Snapdragon 439 chipset. | ||
| vivo Y12s | V2026 | 10 | 5.6.0 | Yes | Yes | No | MediaTek Helio P35; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G on both SIMs w/o root permissions. | ||
| vivo Y20i | V2032 | 10 | 5.5.3 | Yes | Yes | No | Full API 4.2 support for 4G/3G/2G on both SIMs and frequency without root permissions. Based on Qualcomm Snapdragon 460 chipset. | ||
| vivo Y22s | V2206 | 13 | 5.5.3 | Yes | Yes | No | Full API 4.2 support for 4G/3G/2G on both SIMs and frequency without root permissions. Based on Qualcomm Snapdragon 680 4G chipset. | ||
| vivo Y51 (December 2020) | V2035 | 13 | 5.6.1 | Yes | Yes | No | API 4.2 fully working on 4G/3G/2G without root. Phone doesn't support, nor read LTE_CA. The chipset is a Qualcomm Snapdragon 665. | ||
| vivo Y91 | vivo 1811 | 8.1.0 | 5.5.3 | Yes | Yes | No | Full API 4.2 support for 4G/3G/2G on both SIMs and frequency without root permissions. Based on Qualcomm Snapdragon 439 chipset. | ||
| vivo 1817 | 8.1.0 | 5.5.4 | Yes | Yes | No | Working perfect in 4G/3G/2G w/o root permissions. 4G/3G/2G on one sim, only 3G/2G on the other. Based on Qualcomm Snapdragon 439 chipset. | |||
| vivo Y91c (2020) | vivo 1820 | 8.1.0 | 5.5.4 | Yes | Yes | No | MediaTek Helio P22; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G on both SIMs w/o root permissions. |
Vodafone
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Support read Bands / Freq | B66/71 Bug | More info |
|---|---|---|---|---|---|---|---|
| Vodafone Smart Turbo 7 | VFD 500 | 6.0 | 5.0.9 | Partial | No | Reports incorrect 2G/3G data. Check GPS is OK when leaving areas with poor/no GPS. Check MNC is right on 4.2 API. Based on a Mediatek MT6735M |
Xiaomi
- Some model maybe not working.
- On some phones, it is possible to band lock by launching the MiuiBandMode app via Activity Launcher or QuickShortcutMaker. This may or may not work on newer phones.
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Dual SIM | Support read Bands / Freq | B66/71 Bug | 5G | More info |
|---|---|---|---|---|---|---|---|---|---|
| 11T | 21081111RG | 11 | 5.5.3 | Yes | Yes | Yes | Yes | MediaTek Dimensity 1200 5G; 4G LTE LAC may be 65535. Working perfect in 2G/3G/4G/5G on both SIM w/o root. Needs more testing. | |
| Mi A1 | 9.0.0 | 5.3.0 | Yes | Yes | Yes | 4G/3G/2G on both SIM, LTE-A 2CA Cat6, Snapdragon 625 | |||
| Mi Mix 2 | 9.0.0 | 5.X | Yes | Yes | Yes | Working perfect in 4G/3G/2G w/o root. 4G/3G/2G on one sim, only 3G/2G on the other, Snapdragon 835 | |||
| Mi Mix 3 5G | Andromeda_EEA | 9.0.0 | 5.4.3 | Yes | No | Yes | Yes | 5G band supported only n78 NSA, LTE-A 5CA, Snapdragon 855 | |
| Redmi 4 Prime | MMB29M | 6 | 5.0.8 | Partial | LTE-A 2CA Cat6 | ||||
| Redmi 4a | 2016117 | 7.1.2 | 5.5.4 | Yes | Partial | Yes | Working perfect in 4G/3G/2G w/o root. 4G/3G/2G on one sim, only 3G/2G on the other, Snapdragon 425. | ||
| Redmi 4x | Redmi 4X | 7.1.2 | 5.5.4 | Yes | Partial | Yes | Working perfect in 4G/3G/2G w/o root. 4G/3G/2G on one sim, only 3G/2G on the other, Snapdragon 435. | ||
| Redmi 5a | MCE3B | 7.1.2 | 5.5.4 | Yes | Partial | Yes | Working perfect in 4G/3G/2G w/o root permissions. 4G/3G/2G on one sim, only 3G/2G on the other. Based on Qualcomm Snapdragon 425 chipset. | ||
| Redmi 6A | M1804C3CE | 9.0.0 | 5.5.3 | Yes | Yes | Yes | MediaTek Helio A22; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G w/o root. | ||
| Redmi 7 | M1810F6LE | 10.0 | 5.5.3 | Yes | Yes | Yes | Working perfect in 4G/3G/2G on both SIMs. However, locking bands needs root. Snapdragon 632. | ||
| Redmi 7A | M1903C3EC (China) | 10.0 | 5.5.1 | Yes | Yes | Yes | Working perfect in 4G/3G/2G on both SIMs. However, locking bands needs root. Snapdragon 439 | ||
| M1903C3EE (EEA) | 10.0 | 5.5.3 | Yes | Yes | Yes | ||||
| M1903C3EG (Global) | 9.0 | 5.4.5 | Yes | Yes | Yes | ||||
| Redmi 8 | M1908C3IG | 11.0.11 | 5.4.3 | Yes | Yes | Yes | Working perfect in 4G/3G/2G w/o root. 4G on both SIM. Snapdragon 439 | ||
| Redmi Note 2 | 5.0.2 | 4.1.6 | Partial | Old API not working, new API working. LTE Cat4 | |||||
| Redmi Note 3 (Snapdragon) | 6.0.1 | 5.0.9 | Old API fine, LTE-A Cat6 | ||||||
| Redmi Note 3 (MediaTek) | 5.0.2 | Not tested but Beware theres a Mediatek model based on MT6795 Helio X10 | |||||||
| Redmi Note 4 (Snapdragon) | 7.0.0 | 5.1.7 | Yes | Yes | one SIM: 2G/3G/4G other: 2G/3G, LTE-A 2CA Cat6, Snapdragon 625 | ||||
| Redmi Note 4 (MediaTek) | 6.0 | Not tested but beware theres a Mediatek model based on MT6797 Helio X20 | |||||||
| Redmi Note 5 AI | M1803E7SG | 8.1.0 | 5.2.3 | Yes | Yes | Working perfect in 4G/3G/2G w/o root. Snapdragon 636 | |||
| Redmi Note 8 (2019) | M1908C3JE | 10.0 | 5.5.3 | Yes | Yes | Yes | Full API 4.2 support for 4G/3G/2G on both SIMs and frequency without root permissions. However, locking bands needs root. LTE-A (4CA) Cat12 | ||
| Redmi Note 8 (2021) | M1908C3JGG | 11 (MIUI 12.5) | Not tested but based on a MediaTek Helio G85 | ||||||
| Redmi Note 8 PRO | M1906G7G | 9.0.0 | 5.4.1 | Yes | Yes | Yes | MTK; 2G/3G LAC may be 65535. Working good without root. 4G on both SIM. Based on a Mediatek, Helio G90T | ||
| Redmi Note 8T | M1908C3XG | 9.0.0 | 5.4.1 | Yes | Yes | Yes | Qualcomm; +LTE Downlink Bandwidth, LTE-A 4CA Cat12, Snapdragon 665 | ||
| Redmi Note 9 Pro | M2003J6B2G | 11 | 5.6.0 | Yes | Yes | Yes | Full API 4.2 support for 4G/3G/2G and frequency without root permissions. Based on Qualcomm Snapdragon 720G chipset. | ||
| Redmi Note 11 | 2201117TG | 11 | 5.5.4 | Yes | Yes | Yes | Full API 4.2 support for 4G/3G/2G and frequency without root permissions. Based on Qualcomm Snapdragon 680 chipset. | ||
| Redmi Note 12 4G | 23021RAAEG | 13 | 5.6.0 | Yes | Yes | Yes | Full API 4.2 support for 4G/3G/2G and frequency without root permissions. Based on Qualcomm Snapdragon 685 chipset. | ||
| Mi 4c 32GB | 5.1.1 | 5.0.7 | Partial | Partial | Partial | Reads band with Qualcomm + root method. Shows nothing without root with new API (blank). 4G/3G/2G on one sim, only 3G/2G on the other. LTE Cat 4 | |||
| Mi 4c 16GB | 7.1.2 | 5.2.4 | Yes | Partial | Yes | Working perfect in 4G/3G/2G w/o root. 4G/3G/2G on one sim, only 3G/2G on the other. LTE Cat 4 | |||
| Mi 5 | MI_5 | 7.0 | 5.0.5 | Yes | Partial | Yes | API 4.2+ working on 4G. Android 4.2+ can read band data. LTE-A 3CA Cat12 | ||
| 8.0.0 | 5.2.4 | Yes | Partial | Yes | Working perfect in 4G/3G/2G w/o root. 4G/3G/2G on one sim, only 3G/2G on the other. | ||||
| Mi 6 | 8.0.0 | 5.2.4 | Yes | Yes | Yes | Working perfect in 4G/3G/2G w/o root. LTE-A 3CA Cat9, Snapdragon 835 | |||
| Mi 8 | M1803E1A | 10.0 | 5.4.3 | Yes | Yes | Yes | 2G/3G/4G on both SIM, LTE-A 4CA Cat16, Snapdragon 845 | ||
| Mi 9 | 10.0 | 5.4.3 | Yes | Yes | Yes | 2G/3G/4G on both SIM, LTE-A 5CA Cat18, Snapdragon 855 | |||
| Mi 9T Pro | M1903F11G | 10.0 | 5.4.3 | Yes | Yes | Yes | 2G/3G/4G on both SIM, Snapdragon 855 | ||
| Mi 10 Lite 5G | M2002J9G | 11 | 5.5.3 | Yes | Yes | Yes | Yes | 2G/3G/4G/5G on both SIM, Snapdragon 765G 5G (X52 modem, LTE-A 4CA Cat18). Bands can be locked on SIM1 with launching the com.android.settings.MiuiBandMode activity. | |
| Mi Pad 4 LTE | 9.0.0 | 5.3.0 | Yes | No | Yes | 4G only. LTE-A 3CA Cat12, Snapdragon 660 |
POCO by Xiaomi
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Dual SIM | Support read Bands / Freq | B66/71 Bug | 5G | More info |
|---|---|---|---|---|---|---|---|---|---|
| POCO M5 | 13.0.014 | 5.6.0 | Yes | Yes | Yes | Working perfect in 4G/3G/2G w/o root on both SIMs. sometimes error LAC 65535 on UMTS. locking bands w/o root. Mediatek Helio G99 |
ZTE
| Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Support read Bands / Freq | Support read LTE_CA | B66/71 Bug | More info |
|---|---|---|---|---|---|---|---|---|
| AOSON M701FD | M701FD | 5.1 LMY47D | No | Signal incorrect on old API, do not use | ||||
| BLADE A470 | A470 | 5.1.1 | 4.1.6 | Yes | Yes | Works all new API 2g 3g 4g also without sim , read lte band with root , but no info band and no block band | ||
| BLADE A110 | 5.1 | 5.0.7 | Old API works 4G | |||||
| ZTE Grand X3 | Z959 | 5.1.1 | Yes | |||||
| ZTE Axon 7 | A2017U | 6.0.1 | 5.0.3 | Yes | Yes | Yes | Without root can read band data using new API and Android 7.0+ |
Other Phone / Multiple branding
| Manufacture | Phone Name | Model Number | Android Version | Cellmapper version | API 4.2 Support | Dual SIM | Support read Bands / Freq | B66/71 Bug | More info |
|---|---|---|---|---|---|---|---|---|---|
| Allview | Allview P5 Lite | 6.0 | 5.0.7 | Yes | |||||
| BlackView | BlackView BV600 | 6.0 | 5.X | Partial | New API ok 4G, please test more | ||||
| BQ | BQ Rich | BQ-5012L | 7.0 | 5.X | Yes | Yes | Yes | New API ok 4G/3G, other SIM is 2G | |
| Fly | Fly FS406 | FS406 | 6.0 | 5.X | Yes | Old API not working, so use new api | |||
| InFocus | InFocus M370 | 6.0.1 | 5.X | Yes | Yes | Dual SIM working on API 4.2+ 4G+2G | |||
| LYF | LYF Wind 4 | LS-5014 | 5.1.1 | 4.1.6 | Partial | Old API fine, API 4.2+ on 4G | |||
| Senseit | Senseit N151 | N151 | 7.0 | 5.X | Yes | Yes | Yes | New API ok 4G/3G, other SIM is 2G | |
| SPRD | Smart Max 4.0 Plus | SMART_MAX_4.0_PLUS | 5.1.1 | No | |||||
| UMIDIGI | UMIDIGI_Z | 6.0 | 5.1.0 | Partial | On API 4.2+, RSRQ report 0 and maybe incorrect SINR also | ||||
| UMIDIGI | Z Pro | 7.0 | 5.x | Partial | Reports that the API doesn't work for 3G, but works for 2G/4G. based on MediaTek Helio X27 | ||||
| VinSmart | Vsmart Live | 10 | 5.6.0 | Yes | Yes | Yes | API 4.2 working on 4G/3G/2G, but it may need more testing. |
Windows 10 Mobile (all manufacturers)
- Requirements: Windows 10 Mobile RTM or newer
- Support read Bands / Freq: Yes
- Required 512MB RAM, more than 1GB recommended
| Manufacture | Phone Name | Model Number | Dual SIM | More info |
|---|---|---|---|---|
| HP | Elite X3 | No | 4G LTE band supported 1, 2, 3, 4, 5, 7, 8, 12, 17, 19, 20, 26, 28, 29, 38, 39, 40, 41 | |
| Microsoft | Lumia 950 | RM-1105 | No | 4G LTE band supported 1, 2, 3, 4, 5, 7, 8, 12, 17, 20, 28, 38, 40, 41 |
| Microsoft | Lumia 950 XL | RM-1085 | No | 4G LTE band supported 1, 2, 3, 4, 5, 7, 8, 12, 17, 20, 28, 38, 40, 41 |
Unsupported
- Jolla, you can try but not officiality supported //7.1.2017
- Xiaomi MI MIX - Cell ID API not working //5.1.2017
- DIGNO 202K (Softbank) - OLD API not working
- Alcatel OneTouch P350X - OLD API not working
- Vivo Y53 - OLD API and Cell ID API not working