Android App Settings
Here is instruction about Android App Settings
Main Settings
Enable Instant Upload
This feature enable Instant Upload (Live Upload). This feature upload all data cells and tower data to server. We recommended use this feature when you have mobile big data package. You can always upload later on Upload & Statistics screen or use Wifi upload feature.
Before enable this, please check our privacy policy.
Wifi Auto Upload
This feature is similar as Instant Upload but this force upload when you are on WiFi network. We recommended enable this feature.
Before enable this, please check our privacy policy.
Vibrate on Cell ID change
Phone will vibrate when cell id change.
Wear Notifications Enabled
You can read CellMapper data on your smart clock.
Play notification on Cell ID change
Phone will play notification sound when cell id change.
Start on Phone boot
Cellmapper Application will start when your phone start up.
Override Volume Controls
This disable the volume buttons to prevent accidentally pressing them.
Display in Imperial Units
This display speed in MPH instead of KM/H. Altitude in FT vs M.
Output to CSV file
This will create a CSV file in your device storage to record data points.
You found CSV files on CellMapper folder on home folder. Files named like signal-yyy-mm-dd.csv . You transfer files to your computer via USB cable example. Some phone maybe prevent access folder, then you need move CSV files with some file manager another folder.
There is information about CSV format.
Dual SIM Support
Cannot enable when API 4.2+ enabled!
Enable or disable Dual SIM support for phones what not support API 4.2+. Enabling or disabling this, you need restart application.
Estimated Frequency Bands and Bandwidth
Require Internet Connection. When enabling this feature, application will contact to server get estimate GSM/UMTS/LTE bands and bandwidth information. You see on Cell Screen star (*) after band number when it loaded from server. If your phone support band reading from API, then it use that API instead server data.
Show Hex values
Show hex values instead of decimal values for Cell IDs.
Map Settings
Who Towers on Map
Show or hide all towers on application map
Show low accuracy towers
Show or hides the towers that are considered low accuracy due to insufficient data.
Low accuracy towers can be example one sector towers...
Enable location exclusion (geofencing)
Enable this feature, restart app and then go to application map. Long tap location what you want exclude. Then you see purple circle on area what not recorded. On Cell screen you see recording disabled when you are in excluded area.
Geofencing radios (metres)
Set the exclusion radius for the adobe setting. App restart required.
Group Towers
Group tower on app map for less screen clutters and better performance. We recommend enable this feature make map loading faster.
Advanced Settings
Use new Android 4.2 Cell ID API
Default: On (on Samsung and some phone's off)
This will use the new cellid API for Android 4.2 and newer phones. This doesn't work most Samsung and Huawei Phones.
Some manufacture like Samsung not implement new Android Cell ID API in their phones. Also some phones have issues with Android 4.2 API. So we recommended check your phone support on our page. If your phone not in list, please contact to our support with email so we can add to list.
Please check your phone support here.
Check GPS age
Default: On
This increases data accuracy when going thought tunnels/urban areas. Uncheck if you see 'GPS fix too old' even if doesn't.
We recommended keep this enabled increases bad GPS locations or GPS data freezings. This will keep data accurate on map.
Minum Recording Interval
Default: 5
The minimum number of seconds between data points.
Keep Screen On
Can only disabled when Android API 4.2 enabled. Also cannot disabled when recording CDMA network.
If your phone not support API 4.2, we recommended use on Main Menu "Blank Screen" feature saving battery.
Keep Screen On Brightness
How bright to keep the screen when phone attempts go to sleep.
Record Neighbor Cells
Default: off Record neighbor cell info. Very unreliable unless your phone supports < 4.2 CellID API.
This feature record all neighbor cells and tower info on 2G. On 3G and 4G it will continue recording all info what see you see on cell screen. You will not see neighbor tower's on 3G/4G because phone api not show their cell id:s example.
Suppress Errors
Default: on
This will hide all error popups and dialogs unless they are important.
Hide Unknown Cells
Default: off
Hides cells that have unknown Cell ID on the main screen.
Show cells with frequency data only
Default: off
Show cells that have a valid ARFCN/URFCN/EARFCN on cell screen.
Read logcat for Samsung / Sony Field Test data (root)
Default: off
This will read your logcat output to attempt to get Samsung/Sony field test mode data. Do not enable this if you are using the screen reader method. On newer phones, field test must run in foreground or dual-window mode. Requires root for Android 4.1+ and app restart when changed.
Read Qualcomm LTE data (root)
Default: off
This will read from Qualcomm modems the LTE frequency
Qualcomm modem device
Default: /dev/smd11
This is the modem device CellMapper will use. Application restart required.
= Purge uploaded data
Default: on
This will purge uploaded data points from the Cellmapper local database. Locally calculate will still work once this is completed.
Application still keep important points on local database. This should keep on, because CellMapper App will slowdown when database size too large.
Uploade Batch Size
Default: 100
Number of datapoints to upload per request for Upload Later. Change this lower value if upload constantly fails.
Record 2G/3G/4G data
Default: all on
Enable or disable this options enabling or disabling recording this network. Recommended use when phone report incorrect data on some network.
Debug
Send Debug Info
Creates an email to send the developer debug information about your device. Useful when features are not working on your particular phone.
Use this feature sending debug data to developer. Please always write description and also attach screenshot helping debugs.
If this crash, please send email to support (at) cellmapper.net and report this.