Difference between revisions of "Tested Phones"

Jump to navigation Jump to search

Tested Phones (view source)

Revision as of 00:58, 20 June 2022

20,701 bytes added ,  00:58, 20 June 2022
→‎OPPO
(→‎Samsung: S7 g2-g3 after Oreo)
(168 intermediate revisions by 32 users not shown)
Line 1: Line 1:
__FORCETOC__
__FORCETOC__
= Tested Phones =
== Tested Phones ==
Here is listed phone what users have tested. We recommend using Android 7+ with API 4.2+ supported phones or Windows 10 Mobile to map data to CellMapper server.


Here is listed phone what users have tested. We recommended use Android 7+ with API 4.2+ supported phone's or Windows 10 Mobile mapping data to CellMapper.
As of October 2021, Cellmapper require Android 4.4.2 (KitKat) or newer [https://twitter.com/CellMapper/status/1449280699102601221 See]


* Phone Name = Phone Model Name, example: "Samsung Galaxy S6"
* Phone Name = Phone Model Name, example: "Samsung Galaxy S6"
Line 10: Line 11:
* Support read Band / Freq = Is this phone supported read band and frequency from phone app. Example Samsung Service Mode.  
* Support read Band / Freq = Is this phone supported read band and frequency from phone app. Example Samsung Service Mode.  
* API 4.2 Support = If your phone supports API 4.2, please use that.
* API 4.2 Support = If your phone supports API 4.2, please use that.
* API 7.0+ Support = If your phone supports API 7.0+, please use that.
* LTE_CA = Cellmapper App can read CA data from mostly Samsung's phones via FieldTestReader.
* LTE_CA = Cellmapper App can read CA data from mostly Samsung's phones via FieldTestReader.
* More info = More information about phone
* B66/71 Bug = Reports wrong frequency for newer LTE bands such as B66/71
* 5G = If model supports 5G but does not return correct information, please say "No". Otherwise leaving it blank.
* More info = More information about specific model


== Supported ==
== Supported ==


=== Alcatel ===
=== Alcatel ===
<div class="table-responsive">
<div class="table-responsive">
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || API 7.0+ Support || Support read Bands / Freq || Support read LTE_CA || B66/71 Bug || 5G || More info
|-
|Alcatel Fierce XL || 5054N || 5.1.1 || 4.X || {{Yes}} || {{Yes}} ||
|-
|Alcatel POP 2 || 5042D || 4.4.4 || 5.0.8 || {{Yes}} || || Band reading with NSG working
|-
| rowspan="2" |Alcatel Pop 4 || 5051D || 6 || 5.x || {{Yes}} || {{Yes}} || Dual SIM, both supported for 2G, 3G and 4G, with band reading on both SIM. Best Buy for mapping||
|-
|5051X || 6.0.1 || 5.0.8 || {{Yes}} || {{Yes}} || Unrootable. API 4.2 working for 2G, 3G and 4G. Also has band reading and EARFCN reading.
|-
|Alcatel One Touch Pop C3 || 4033D || 4.2.2 || 5.x || {{No}} || {{No}} || With new API, it shows nothing||
|-
|-
|Alcatel U5 || 5044Y || 6.0 || 5.1.7 || {{No}} || {{No}} || {{No}} || {{No}} || {{No}} || {{No}} || Unrootable. API 4.2 Unsupported. Without API 4.2 this shows and Maps OK but no GSM/UMTS/LTE band locking. Without SIM card it shows UNKNOWN and false signal. Chipset Mediatek MT6737M
|}
|}
</div>
</div>


=== Archos ===
=== Archos ===
<div class="table-responsive">
<div class="table-responsive">
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || API 7.0+ Support || Support read Bands / Freq || Support read LTE_CA  || B66/71 Bug || 5G || More info
|-
|-
|Archos 50 Cobalt || || 5.1.1 || || {{Yes}} || ||
 
|-
|-
|}
|}
</div>
</div>


=== Asus ===
=== ASUS ===
 
<div class="table-responsive">
<div class="table-responsive">
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || API 7.0+ Support || Support read Bands / Freq || Support read LTE_CA  || B66/71 Bug || 5G || More info
|-
|ZenFone 2 Laser || ZE551KL || || 4.X || {{No}} || ||
|-
|ZenFone 2 || ZE551ML || 5.0 - 6.0.1 || 4.X - 5.X || {{Yes}} || {{No}} ||
|-
|ZenFone 3 Max || ZC520TL || 6.0 || 5.x || {{Partial}} || {{No}} || On 3G, with new API the values go up to -46dBm, that's not true. On 4G looks like ok.
|-
|ZenPad C 7.0 || Z170CG || 5.0 || 5.x || {{No}} || {{No}} || On 3G, with new API the values are at least 10db more than the actual values.
|-
|-
|}
|}
Line 66: Line 50:


=== BlackBerry ===
=== BlackBerry ===
<div class="table-responsive">
<div class="table-responsive">
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || API 7.0+ Support || Support read Bands / Freq || Support read LTE_CA  || B66/71 Bug || 5G || More info
|-
|-
|BlackBerry Priv || STV100-4 || 6.0.1 || 5.X || {{No}} || || With API 4.2+ on, phone report incorrect data.
|BlackBerry || BBC100-1 || 7.0.1 || 5.0.8 || {{Yes}} || || ||
|-
|BlackBerry || BBC100-1 || 7.0.1 || 5.0.8 || {{Yes}} || || Not yet released but please confirm
|}
|}
</div>
</div>


=== Essential ===
=== Essential ===
<div class="table-responsive">
<div class="table-responsive">
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || API 7.0+ Support || Support read Bands / Freq || Support read LTE_CA  || B66/71 Bug || 5G || More info
|-
|-
| PH-1 || PH-1 || 7.1.1, 8.1.0 || 5.X || {{Yes}} || {{Yes}} ||
| PH-1 || PH-1 || 7.1.1, 8.1.0, 9 || 5.X || {{Yes}} || {{Yes}} || ||
|-
|-
|}
|}
Line 91: Line 71:


=== Google ===
=== Google ===
* All Google Phone's support API 4.2+
* All Google Phone's support API 4.2+
* With Android 7.0+ you can also read band infromation from Cell ID API without root.
* With Android 7.0+ you can also read band infromation from Cell ID API without root.
Line 98: Line 77:
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA|| More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || B66/71 Bug || 5G || More info
|-
|-
|Nexus 4 || || || || {{Yes }} || || ||
|Nexus 4 || || || || {{Yes }} || || || || || CM App may not work due to older Android OS 4.2 -> 5.1, Uses Qualcomm APQ8064 Snapdragon S4 Pro
|-
|-
|Nexus 5 || || || || {{Yes }} || || || Something issue with Qualcomm method, can use screen reader from NSG
|Nexus 5 || || || || {{Yes }} || || || || || CM App may not work due to older Android OS 4.4 -> 6.0, Uses Qualcomm MSM8974 Snapdragon 800
|-
|-
|Nexus 6 || || || || {{Yes }} || || ||
|Nexus 6 || || || || {{Yes }} || || || || || CM App may not work due to older Android OS 5.0, Upgrade to 7.1.1, Uses Qualcomm APQ8084 Snapdragon 805
|-
|-
|Nexus 7 || || || || {{Yes }} || || ||
|Nexus 7 (2013) || || || || {{Yes }} || || || || || CM App may not work due to older Android OS 4.3 -> 6.0, Uses Qualcomm Snapdragon S4 Pro
|-
|-
|Nexus 6P || || 7.1 || 5.0.6 || {{Yes }} || {{Yes}} || {{Partial}} || With Android 7+ Band reading not need root. Phone shows LTE-A when you download something.
|Nexus 6P || || 7.1 || 5.0.6 || {{Yes }} || {{Yes}} || {{Partial}} || || || With Android 7+ Band reading not need root. Phone shows LTE-A when you download something.
|-
|-
|Nexus 5X || || 7.1 || 5.0.6 || {{Yes }} || {{Yes}} || {{Partial}} || With Android 7+ Band reading not need root. Phone shows LTE-A when you download something.
|Nexus 5X || || 7.1 || 5.0.6 || {{Yes }} || {{Yes}} || {{Partial}} || || || With Android 7+ Band reading does not need root. Phone shows LTE-A when you download something.
|-
|-
|Pixel || || 7.1 || 5.0.6 || {{Yes }} || {{Yes}} || {{Yes}} || With Android 7+ Band reading not need root. Doesn't read the SINR on LTE, reports it constantly as 30db.  
|Pixel || || 7.1 || 5.0.6 || {{Yes }} || {{Yes}} || {{Yes}} || || || With Android 7+ Band reading does not need root. Doesn't read the SINR on LTE, reports it constantly as 30db.  
|-
|-
|Pixel 2/2XL || || 8.1 || 5.x || {{Yes }} || {{Yes}} || {{Yes}} ||  
|Pixel 2/2XL || || 8.1 || 5.x || {{Yes }} || {{Yes}} || {{Yes}} || {{Yes}} || ||
|-
|Pixel 3/3XL || || 10.0 || 5.x || {{Yes }} || {{Yes}} || {{Yes}} ||  || ||
|-
|Pixel 3a/3aXL || || 10.0 || 5.x || {{Yes }} || {{Yes}} || {{Yes}} ||  || ||
|-
|Pixel 4/4XL || || 10.0 || 5.x || {{Yes }} || {{Yes}} || {{Yes}} ||  || ||
|-
|Pixel 4a || || 10.0 || 5.x || {{Yes }} || {{Yes}} || {{Yes}} ||  || ||
|-
|Pixel 4a 5G/5 || || 11.0 || 5.5 || {{Yes }} || {{Yes}} || {{Yes}} || ||  {{No  }}  || As of February 2021, only reports 5G signal quality. As of Android S DP3, 5G Standalone properly reports data (including gNB), however the update rate seems to be a little slow so RSRP may not be completely accurate upon location.
|-
|Pixel 5a 5G || || 11.0 || 5.5.2 || {{Yes }} || {{Yes}} || {{Yes}} || || {{Yes }}  || Tested on AT&T n5, generates accurate trails (Android 11 September 2021 Update)
|}
|}
</div>
</div>


=== HTC ===
=== HTC ===
* Mostly HTC phone's support API 4.2+
* Mostly HTC phone's support API 4.2+
* HTC phone's support band reading from Qualcom modem method (root) and with Android 7.0+ from Cell ID API without root
* HTC phone's support band reading from Qualcom modem method (root) and with Android 7.0+ from Cell ID API without root
Line 126: Line 116:
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || B66/71 Bug || More info
|-
|-
|HTC One_M8 || HTC One_M8 || 6.0 || 5.0.6 || {{Yes}} || {{Yes}} || || With Qualcomm method working (root)
|HTC One_M8 || HTC One_M8 || 6.0 || 5.0.6 || {{Yes}} || {{Yes}} || || || With Qualcomm method working (root). LTE Cat4 device.
|-
|-
|HTC One_M9 || EU model || 7.0 || 5.0.8 || {{Yes}} || {{Yes}} || || Without root can read freq data using new API and Android 7.0+
|HTC One_M9 || EU model || 7.0 || 5.0.8 || {{Yes}} || {{Yes}} || || || Without root can read freq data using new API and Android 7.0+. LTE-A Cat6 device.
|-
|-
|HTC One_A9 || || 6.0 || 4.x || {{Yes}} || || ||
|HTC One A9 || || 6.0 || 4.x || {{Yes}} || || || || LTE-A Cat7 (2CA) device.
|-
|-
|HTC 10 || US model || 7.0 || 5.0.6 || {{Yes}} || {{Yes}} || || Without root can read band data using new API and Android 7.0+
|HTC 10 || US model || 8.0 || 5.0.6 || {{Yes}} || {{Yes}} || || || Without root can read band data using new API and Android 7.0+. LTE-A (3CA) Cat9 device.
|-
|-
|HTC U Ultra || EU Model || 7.0 || 5.x || {{Yes}} || {{Yes}} || {{No}} || Band reading working without root
|HTC U Ultra || EU Model || 8.0 || 5.x || {{Yes}} || {{Yes}} || {{No}} || || Band reading working without root, LTE-A (3CA) Cat11
|-
|-
|HTC U11 || HTC_U11 || 7.1.1 || 5.1.1 || {{Yes}} || {{Yes}} || || Band reading working without root
|HTC U11 || HTC_U11 || 9.0 || 5.1.1 || {{Yes}} || {{Yes}} || || || Band reading working without root, LTE-A (4CA) Cat16
|}
|}
</div>
</div>


=== Huawei ===
=== Huawei ===
 
* Older Huawei phone's not support API 4.2+.
* Mostly Huawei phone's not support API 4.2+.
* Huawei with HiSilicon Kirin 960 Chipset should support API 4.2+ and Band reading Android 7.0+
* Huawei with HiSilicon Kirin 960 Chipset should support API 4.2+ and Band reading Android 7.0+


Line 150: Line 139:
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Dual SIM || Support read Bands / Freq || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Dual SIM || Support read Bands / Freq || Support read LTE_CA|| B66/71 Bug || More info
|-
|Huawei Ascend Y550 (EU) || Y550-L01 || 4.4.4 || 4.1.6 || {{No}} || || || || || Newer CM App may not work due to older Android OS 4.4.2, Uses Qualcomm MSM8916 Snapdragon 410
|-
|-
|Huawei Ascend Y550 || Y550-L01 || 4.4.4 || 4.1.6 || {{No}} || ||
|Huawei Nova 2 || PIC-LX9 || 8.0 || 5.X || {{partial}} || || || || ||  
|-
|-
|Huawei Y635 dual sim || || 4.X || 4.0 || {{No}} || || {{No}} ||  
|Huawei Nova 3i || INE-LX2 || 9.0 || 5.5.1 || {{Yes}} || {{no}} || {{Yes}} || || || Full API 4.2 support for 4G/3G/2G and frequency without root permissions.
|-
|-
|Huawei 4C
|Huawei 4C || CHC-U01 || 4.4.2 || 5.X || {{No}} || {{No}} || || || || Newer CM App may not work due to older Android OS 4.4.2, Uses HiSilicon Kirin 620
|CHC-U01
|4.4.2
|
|{{No}}
|
|{{No}}
|Phone maybe not working
|-
|-
|Huawei Y5 || Y560-L01 || 5.1.1 || 4.1.7 || {{Yes}} || || {{Yes}} || Works all new API 2g 3g 4g also without sim , for block 4g only ,is possibile with root with this program Toggle Network Type 5.0  
|Huawei Y5 || Y560-L01 || 5.1.1 || 4.1.7 || {{Yes}} || || {{Yes}} || || || Newer CM App may not work due to older Android OS 5.1, Works all new API 2g 3g 4g also without sim , for block 4g only ,is possibile with root with this program Toggle Network Type 5.0  
|-
|-
|Huawei Y6 Pro || TIT-L01 || 5.1|| 5.0.8 || || || || Maybe report incorrect RSRP on 4G
|Huawei Y6 Pro (2015) || TIT-L01 || 5.1|| 5.0.8 || || || || || || Newer CM App may not work due to older Android OS, Reports incorrect RSRP on 4G
|-
|-
|Honor 6 || H60-L04 || 5.X || 4.0 || {{No}} || || {{No}} ||  
|Huawei Y6 (2019) || MRD-LX1 || 9.0|| 5.4.1 || {{Yes}} || || {{Yes}} || || ||Do not enable Android 7.0+ support only tick Android 4.2+. Reads 2G/3G/4G ok, LTE bands 1/3/7/8/20, 2CA, NOT Rootable. Mediatek MT6761/Helio A22
|-
|-
|Honor 7 || PLK-L01  || 5.0.2 || 4.X || {{No}} || || ||  
|Honor 6 || H60-L04 || 6.0 || 5.4.1 || {{No}} || {{No}} || {{Partial }} || {{No}} || || Reads bandwidth and band number ok. Signal shows ok. Shows speedtest when doing so. Android 6.0 [https://consumer-tkb.huawei.com/tkbapp/downloadWebsiteService?websiteId=668967 FW] [https://www.hihonor.com/uk/support/phones/honor6/ Link] API 4.2 NOT Support as this shows 0dbm
|-
|-
|Huawei P8 Lite || PRA-LX1 ||7.0 || 5.0.8 || {{No}} || || ||
|Honor 7 || PLK-L01  || 5.0.2 || 4.X || {{No}} || || || || || Newer CM App may not work due to older Android OS
|-
|-
|Huawei Honor 8 || FRD-L19 || 7.0 || 5.X || || || || Report lots of incorrect data
|Huawei P8 Lite || PRA-LX1 ||7.0 || 5.0.8 || {{No}} || || || || ||
|-
|-
|Huawei P9 Lite ||VNS-L31||6.0|| 5.X || {{No}} || || || Sometimes report bad -41 / -43 RSRP on LTE
|rowspan=2 |Huawei Honor 8 || FRD-L04 || 8.0 || 5.2.3 || {{Yes}} || || {{Yes}} || {{Yes}} || || API 4.2 support added in Android 8 update.
|-
|-
|Huawei P9 || EVA-L09 (Eva-L19) || 6.0 (7 BETA) || 4.1.7 / 5.0.6 || {{No}} || || {{No}} || Sometimes Cell ID shows 0 when mapping 2G/3G network. API 4.2+ not working on Android 7 BETA.
| FRD-L19 || 7.0 || 5.X || {{No}} || || {{No}} || || || Report lots of incorrect data
|-
|-
|Huawei Mate 9 Pro || || 7.0 || 5.X || {{Yes}} || {{No}} || {{Yes}} ||
|Huawei P9 Lite ||VNS-L31||6.0|| 5.X || {{No}} || || || || || Sometimes report bad -41 / -43 RSRP on LTE
|-
|-
|Huawei P10 || VTR-L29 || 7.0 || 5.X || {{Yes}} || {{Yes}} || {{Yes}} ||
|Huawei P9 || EVA-L09 (Eva-L19) || 6.0 (7 BETA) || 4.1.7 / 5.0.6 || {{No}} || || {{No}} || || || Sometimes Cell ID shows 0 when mapping 2G/3G network. API 4.2+ not working on Android 7 BETA. Chipset based on HiSilicon Kirin 955
|-
|-
|Huawei P10 Pro || || 8.0 || 5.X || {{Yes}} || {{Yes}} || {{Yes}} ||
|Huawei Mate 9 Pro || || 7.0 || 5.X || {{Yes}} || {{No}} || {{Yes}} || || ||
|-
|-
|Huawei Mate 10 Pro || BLA-L29 || 8.0 || 5.X || {{Yes}} || {{Yes}} || {{Yes}} || No SNR or Signal Received Strength on Sim 2 but, both Sims can be recorded at the same time. Can also show if phone is CAing.  
|Huawei P Smart || FIG-LX1 || 9 || 5.5.3 || {{Yes}} || {{No}} || {{Yes}} || || ||
|-
|Huawei P10 || VTR-L29 || 7.0 || 5.X || {{Yes}} || {{Yes}} || {{Yes}} || || ||
|-
|Huawei P10 Pro || || 8.0 || 5.X || {{Yes}} || {{Yes}} || {{Yes}} || || ||
|-
|Huawei Mate 10 Pro || BLA-L29 || 8.0 || 5.X || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || || No SNR or Signal Received Strength on Sim 2 but, both Sims can be recorded at the same time.
|-
|Huawei P20 || EML-L29 || 8.1 || 5.X || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || || No SNR or Signal Received Strength on Sim 2 but, both Sims can be recorded at the same time.
|-
|Huawei Mate 20 Pro || LYA-L29 || 9.0 || 9.X || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || || No SNR or Signal Received Strength on Sim 2 but, both Sims can be recorded at the same time.
|}
|}
</div>
</div>


=== Lenovo ===
=== Lenovo ===
<div class="table-responsive">
<div class="table-responsive">
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || B66/71 Bug || More info
|-
|-
| Lenovo K3 Note || Lenovo_K50-t5 || 5.0 || || Need testing more || ||  
| Lenovo Tab 3 || Lenovo_TB3-X70L || 6.0 || || {{No}} || || || Old API ok
|-
|-
| Lenovo Tab 3 || Lenovo_TB3-X70L || 6.0 || || || || Old API ok
| Lenovo P2 || P2a42 || 7.0 || 5.x || {{Yes}} || {{Yes}} || || Supports Band 2G/3G/4G Frequency reading without root with Android 7. LTE-A (2CA) Cat6 device.
|-
|-
| Lenovo P2 || P2a42 || 7.0 || 5.x || {{Yes}} || {{Yes}} || Supports Band / 2G - 3G - 4G Frequency reading without root with Android 7
| Lenovo K6 Note || K53a48 || 7.0 || 5.x || {{Yes}} || {{Yes}} || || LTE Cat4 device, Supports Band 2G/3G/4G Frequency reading without root with Android 7. Seems to have a bug when Language is set to Spanish
|}
|}
</div>
</div>


=== LG ===
=== LG ===
<div class="table-responsive">
<div class="table-responsive">
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || B66/71 Bug || 5G || More info
|-
| Optimus G || E970 || 4.1.2 || 4.1.1 || {{No}} || {{No}} || || || || CM App require Android 4.4.2 or newer, Uses Qualcomm APQ8064 Snapdragon S4 Pro [https://forum.xda-developers.com/f/at-t-lg-optimus-g.1921/ XDA Devs]
|-
| LG G2 || D802 || 6.x || 5.x || {{Partial}} || {{Partial}} || || || || Reads only 4G band/freq and only with root. 4.2+ API not working on 2G/3G.
|-
| rowspan="2" | LG G3 || D850 || 6.x || 5.x || {{Partial}} || {{Partial}} || || || || Reads only 4G band/freq and only with root. 4.2+ API not working on 2G/3G.
|-
|-
| Optimus G || E970 || 4.1.2 || 4.1.1 || {{No}} || {{No}} ||  
|D855 || 6.x || 5.x || {{Partial}} || {{Partial}} || || || || Reads only 4G band/freq and only with root. 4.2+ API not working on 2G/3G.
|-
|-
| LG G2 || D802 || 6.x || 5.x || {{Partial}} || {{Partial}} || || Reads only 4G band/freq and only with root. 4.2+ API not working on 2G/3G.
| LG G4 || H815 || 5.1 - 6.0 || 4.1.5 || {{Partial}} || {{Yes}} || || || || Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2. Read Bands / Freq With root
|-
|-
| rowspan="2" | LG G3 || D850 || 6.x || 5.x || {{Partial}} || {{Partial}} || || Reads only 4G band/freq and only with root. 4.2+ API not working on 2G/3G.
| LG K4 (2017) || LG-M160 || 6.0.1 || 5.8 || {{Yes}} || {{No}} || || || ||
|-
|-
|D855 || 6.x || 5.x || {{Partial}} || {{Partial}} || || Reads only 4G band/freq and only with root. 4.2+ API not working on 2G/3G.
| LG Leon 4G || H340N || 5.0 || 4.1.5 || {{Partial}} || {{Yes}} || || || || Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2. Read Bands / Freq With root
|-
|-
| LG G4 || H815 || 5.1 - 6.0 || 4.1.5 || {{Partial}} || {{Yes}} || || Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2. Read Bands / Freq With root
| rowspan="3" | LG G5 || H820 || 6.x/7.0 || 5.x || {{Yes}} || {{Partial}} || || || || Bands/freq. requires root on Android 6.x. With Android 7.0+ you can even read band without root for 4G and sometimes 3G (but very inconsistently), but everything is working.
|-
|-
| LG K4 (2017) || LG-M160 || 6.0.1 || 5.8 || {{Yes}} || {{No}} || ||
| H830 || rowspan="2" | 6.X+ || rowspan="2" | 4.1.7 || {{Yes}} || {{Yes}} || {{Partial}} || || || rowspan="2" | With Android 6, dbm are correct on 2G, 3G and 4G (but you cannot read band without root). It maps also without SIM, and has band lock. With Android 7.0+ you can even read band without root for 4G and sometimes 3G (but very inconsistently), but everything is working.
|-
|-
| LG Leon 4G || H340N || 5.0 || 4.1.5 || {{Partial}} || {{Yes}} || || Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2. Read Bands / Freq With root
| H850 || {{Yes}} || {{Yes}} || || ||
|-
|-
| rowspan="3" | LG G5 || H820 || 6.x/7.0 || 5.x || {{Yes}} || {{Partial}} || || Bands/freq. requires root on Android 6.x. With Android 7.0+ you can even read band without root for 4G and sometimes 3G (but very inconsistently), but everything is working.
| rowspan="2" | LG V20 || LG-H918 || rowspan="2" | 7.0 || rowspan="2" | 5.X || {{Yes}} || {{Yes}} || || {{Yes}} || || Report B66 same as B3
|-
|-
| H830 || rowspan="2" | 6.X+ || rowspan="2" | 4.1.7 || {{Yes}} || {{Yes}} || || rowspan="2" | With Android 6, dbm are correct on 2G, 3G and 4G (but you cannot read band without root). It maps also without SIM, and has band lock. With Android 7.0+ you can even read band without root for 4G and sometimes 3G (but very inconsistently), but everything is working.
| LG-H990|| {{Yes}} || {{Yes}} || || || ||
|-
|-
| H850 || {{Yes}} || {{Yes}} ||  
| LG K20V (Verizon) || || 7.0 || 5.X || {{Yes}} || {{Yes}} || || || ||
|-
|-
| rowspan="2" | LG V20 || LG-H918 || rowspan="2" | 7.0 || rowspan="2" | 5.X || {{Yes}} || {{Yes}} || || Report B66 same as B3
| LG K8 2017 || M200N || 7.0 || 5.X || {{Yes}} || {{Yes}} || || || || Read Bands / 2G-3G-4G Frequency without root permissions.
|-
|-
| LG-H990|| {{Yes}} || {{Yes}} || ||
|LG Phoenix 2 (AT&T) 2016 || LG-K371 || 6.0/7.0 || 4.x+ || {{Yes}} || {{Yes}} || || || || Read Bands / 2G-3G-4G Frequency without root permissions.
|-
|-
| LG K20V (Verizone) || || 7.0 || 5.X || {{Yes}} || {{Yes}} || ||
| LG K30 || LM-X410TK || 7.1 || 5.X || {{Yes}} || {{Yes}} || || || || Read Bands / 2G-3G-4G Frequency without root permissions.
|-
|-
| LG K8 2017 || M200N || 7.0 || 5.X || {{Yes}} || {{Yes}} || || Read Bands / 2G-3G-4G Frequency without root permissions.  
| LG G7 ThinQ || LM-G710TM || 8.0 || 5.X || {{Yes}} || {{Partial}} || {{Partial}}  || {{Yes}} || || Read only 4G band/frequency without root permissions. Reports B71 as B7 (EARFCN provided by OS is real EARFCN - 65536 / only lowest 16 bits returned) if secondary/additional (CA) cell. B66/B71 reported correctly if primary cell. 
|-
|-
|LG Phoenix 2 (AT&T) 2016
| LG Watch Urbane 2nd Edition LTE || W200A || 7.1.1 || 5.X || {{Yes}} || {{Yes}} || || || || Read Bands / 2G-3G-4G Frequency without root permissions. Wear OS device, regular Android APK sideloaded via ADB. Advertising does not work/show up.
|LG-K371
|6.0/7.0
|4.x+
|{{Yes}}
|{{Yes}}
|
|Read Bands / 2G-3G-4G Frequency without root permissions.
|-
|-
| LG K30 || LM-X410TK || 7.1 || 5.X || {{Yes}} || {{Yes}} || || Read Bands / 2G-3G-4G Frequency without root permissions.  
| LG Phoenix 4 (AT&T) 2018 || LM-X210APM || 8.1 || 5.X || {{Yes}} || {{Yes}} || || || || Sold by Walmart. Read Bands / 2G-3G-4G Frequency without root permissions.
|-
| LG G8 ThinQ (AT&T) ||LM-G820UM || 10.0 || 5.X || {{Yes}} || {{Yes}} || {{Yes}} || {{No}} || || Read Bands / 3G-4G Frequency without root permissions.
|-
| LG Velvet 5G (MTK) || LM-G900TM || 10.0 || 5.5 || {{Yes}} || {{Yes}} || {{Yes}} || {{No}} || {{No}} || Reports 5G RSRP for NSA & SA, but does not properly report some 5G gNB's.
|-
|-
|}
|}
Line 256: Line 251:


=== Motorola ===
=== Motorola ===
<div class="table-responsive">
<div class="table-responsive">
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || B66/71 Bug || More info
|-
|-
| Motorola Moto G 4G (2015) || XT1072 || 5.0.2 || 5.X || {{Partial}} || || || 3G reports wrong RSCP.
| Motorola Moto G 4G (2015) || XT1072 || 5.0.2 || 5.X || {{Partial}} || || || || 3G reports wrong RSCP.
|-
|-
| Motorola Moto G LTE 2014 || XT1039 || 6.x || 5.x || {{Partial}} || {{Partial}} || || Reads only 4G band/freq data, and only with root. 4.2+API not working for 2G/3G.  
| Motorola Moto G LTE 2014 || XT1039 || 6.x || 5.x || {{Partial}} || {{Partial}} || || || Reads only 4G band/freq data, and only with root. 4.2+API not working for 2G/3G.  
|-
|-
| Motorola Moto G Play || XT1609 || 6.0.1 || || {{Yes}} || || ||
| Motorola Moto G Play || XT1609 || 6.0.1 || || {{Yes}} || || || ||
|-
|-
| rowspan="2" |Motorola Moto G4 Plus || XT1642 (EU)  || 6.0.1 / 7.0 || 5.X || {{Yes}} || {{Yes}} || || Reading Dual SIM's, enable API4.2+. Support LTE+3G reading. With Android 7+ Band reading not need root
| rowspan="2" |Motorola Moto G4 Plus || XT1642 (EU)  || 6.0.1 / 7.0 || 5.X || {{Yes}} || {{Yes}} || || || Reading Dual SIM's, enable API4.2+. Support LTE+3G reading. With Android 7+ Band reading not need root
|-
|-
| XT1644  ||  6.0 || 5.x  || {{Partial}}  || {{Yes}} || || NEW API correct only 2g-4g, 3g dbm not good, dual sim with 4g+2g  
| XT1644  ||  6.0 || 5.x  || {{Partial}}  || {{Yes}} || || || NEW API correct only 2g-4g, 3g dbm not good, dual sim with 4g+2g  
|-
|-
| Motorola Charm || MB-502 || 2.2 || 4.1.2 Beta || {{Yes}} || {{Yes}} || ||
| Motorola Charm || MB-502 || 2.2 || 4.1.2 Beta || {{Yes}} || {{Yes}} || || ||
|-
|-
| Motorola Moto E || XT1021 || 5.1 || 5.X || {{Partial}} || || ||
| Motorola Moto E || XT1021 || 5.1 || 5.X || {{Partial}} || || || ||
|-
|-
| rowspan="2" | Motorola Moto E 2nd generation LTE || XT1527 (US) || 5.0.1 || 4.1.2 Beta || {{Yes}} || {{Yes}} || || Can map without SIM card with new API
| rowspan="2" | Motorola Moto E 2nd generation LTE || XT1527 (US) || 5.0.1 || 4.1.2 Beta || {{Yes}} || {{Yes}} || || || Can map without SIM card with new API
|-
|-
| XT1524 (EU version) || 5.x / 6.x || 4.1.5 || {{Partial}} || {{Yes}} || || NEW API correct only 2g-4g, 3g dbm not good. Root required to read frequency.
| XT1524 (EU version) || 5.x / 6.x || 4.1.5 || {{Partial}} || {{Yes}} || || || NEW API correct only 2g-4g, 3g dbm not good. Root required to read frequency.
|-
|-
| Motorola Moto G 3rd Generation || XT1541 || 6.0.1 || 5.1.7 || {{Yes}} || {{Yes}} || || Requires root for reading bands/frequency data. Can map without SIM card with new API but bands/frequency will be missing.
| Motorola Moto G 3rd Generation || XT1541 || 6.0.1 || 5.1.7 || {{Yes}} || {{Yes}} || || || Requires root for reading bands/frequency data. 2g-3g doesn't report bands. Can map without SIM card with new API but bands/frequency will be missing.
|-
|-
| Motorola Moto G5 || XT1676 || 7.0.0 || 5.1.2 || {{Yes}} || {{Yes}} || || SIM1 4G/3G/2G, SIM2 2G
| Motorola Moto G5 || XT1676 || 7.0.0 || 5.x || {{Yes}} || {{Yes}} || || || SIM1 4G/3G/2G, SIM2 2G
|-
|-
| rowspan="2" | Motorola Moto G5 Plus || XT1685 || 7.0.0 || 5.1.2 || {{Yes}} || {{Yes}} || || SIM1 4G/3G/2G, SIM2 3G/2G
| rowspan="2" | Motorola Moto G5 Plus || XT1685 || 7.0.0 || 5.1.2 || {{Yes}} || {{Yes}} || || || SIM1 4G/3G/2G, SIM2 3G/2G
|-
|-
| XT1687 || 7.0.0 || 5.1.0 || {{Yes}} || {{Yes}} || ||  
| XT1687 || 7.0.0 || 5.1.0 || {{Yes}} || {{Yes}} || ||  ||
|-
|-
|Motorola Moto E4 || XT1767 || 7.1.1 || 5.1.2 || {{Yes}} || {{Yes}} || ||
|Motorola Moto C || XT1754 || 7.0.0 || 5.x || {{Yes}} || {{Yes}} || || || SIM1 4G/3G/2G, SIM2 2G - with ROM vers. NRD90M.060 or NRD90M.062
|-
|-
|Motorola Moto X4 || 1900-7 (EU Dual SIM) || 8.0.0 || 5.1.7 || {{Yes}} || {{Yes}} || {{Yes}} || one SIM 2G/3G/4G the other: 2G/3G
|Motorola Moto E4 || XT1767 || 7.1.1 || 5.1.2 || {{Yes}} || {{Yes}} || || || SIM1 4G/3G/2G, SIM2 3G/2G
|-
|Motorola Moto X (2. Gen) || XT1092 || 7.1.2 || 5.3.0 || {{Yes}} || {{Yes}} || || ||
|-
|rowspan="2" | Motorola Moto X4 || 1900-7 (EU Dual SIM) || 8.0.0 || 5.1.7 || {{Yes}} || {{Yes}} || {{Yes}} || || one SIM 2G/3G/4G the other: 2G/3G
|-
| XT1900-6 || 7.1 || 5.1.7 || {{Yes}} || {{Yes}} || {{Yes}} || ||
|}
|}
</div>
</div>


=== Nokia ===
=== Nokia ===
<div class="table-responsive">
<div class="table-responsive">
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || B66/71 Bug || More info
|-
|Nokia 2 || TA-1029 (Dual-SIM) || 7.1.1 || 5.X || {{Yes}} || {{Yes}} || || || Root not required; SIM1 4G/3G/2G, SIM2 3G/2G
|-
|Nokia 2.1 || TA- || 10.0 || 5.X || {{Yes}} || {{Yes}} || || || SIM 1 2G/3G/4G, SIM 2 2G,3G, Root not required. LTE Cat4
|-
|-
|Nokia 2 || TA-1029 (Dual-SIM) || 7.1.1 || 5.X || {{Yes}} || {{Yes}} || || Root not required; SIM1 4G/3G/2G, SIM2 3G/2G
|Nokia 3 || TA- || 7.0 || 5.X || || || || || LTE Cat4, Mediatek MT6737
|-
|-
|Nokia 3 || || 7.0 || 5.X || || || ||  
|Nokia 3.1 || TA-1053 || 10.0 || 5.X || {{Yes}} || {{Yes}} || || || LTE Cat4
|-
|-
|Nokia 5 || TA-1053 || 7.1 || 5.X || {{Yes}} || {{Yes}} || ||
|Nokia 5 || TA-1053 || 7.1 || 5.X || {{Yes}} || {{Yes}} || || || LTE Cat4
|-
|-
|Nokia 8 || TA-1004 || 8.0 || 5.X || {{Yes}} || {{Yes}} || {{Yes}} || Root not required
|Nokia 6.1 Plus || TA-1083 (India) || 10 || x.x || || || || || LTE Cat4, [https://cacombos.com/device/TA-1083 4G Bands and Combos]
 
|-
|Nokia 7.1 || TA-1095 || 10.0 || 5.4 || {{Yes}} || {{Yes}} || || || Both SIMs 4G/3G/2G, LTE-A (2CA) Cat6 [https://cacombos.com/device/TA-1095 4G Bands and Combos]
|-
|Nokia 8 || TA-1004 || 8.0 || 5.X || {{Yes}} || {{Yes}} || {{Yes}} || || Root not required, LTE-A (3CA) Cat9,  [https://cacombos.com/device/TA-1004 4G Bands and Combos]
|-
|Nokia 8.3 || TA-1243 || 11 || x.X || || || || || Needs more testing! LTE-A (4CA) Cat18, See [https://cacombos.com/device/TA-1243 4G/5G Bands and Combos]
|-
|Nokia X20 || TA-1314 || 11 || x.X || || || || || Needs more testing! [https://cacombos.com/device/TA-1314 4G/5G Bands and Combos]
|}
|}
</div>
</div>


=== OnePlus ===
=== OnePlus ===
<div class="table-responsive">
{| class="wikitable table table-bordered"
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Dual SIM || Support read Bands / Freq || Support read LTE_CA  || B66/71 Bug || More info
|-
|OnePlus One || || 5.1 / 4.4 || 4.X  || {{Yes}} || || {{Yes}} || || || API 4.2 not working Android 5.0, but works on 4.4, 5.1+
|-
|OnePlus Two || A2003 || 6.0.1 || 5.X || {{Yes}} || {{Partial}} || {{No}} || {{No}} || || 3G on the first sim shows a wrong dbm value of -51
|-
|OnePlus Three / 3T || A3003 || 6.0.1 / 7.X || 5.X || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || || Without root can read band data using new API and Android 7.0+. OnePlus battery saving may close app when you turn screen off. This is not CellMapper bug.
|-
|OnePlus X || ONE E1003 || 5.X.X || 4.1.6 || {{Partial}} || || {{No}} ||  || ||
|-
|rowspan="3" | OnePlus 5 || || 7.X || 5.1.1 || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || || Band reading working without root.
|-
|rowspan="2" | A5000 || 8.1.0 || 5.2.6 || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || || All functionality mentioned in table works with LineageOS 15.1. For Dual SIM functionality, records up to 4G/3G/2G for primary SIM and 3G/2G for secondary SIM due to chipset limitation. Secondary SIM MNC recorded incorrectly (as the MNC of the primary SIM's network), even when MNC of secondary SIM's network is not the primary SIM network's MNC, correct MNC for secondary SIM recorded only when primary SIM is disabled. "Record Neighbor Cells" works partially, but will return 214783647/65536/-1 for some fields such as MNC/MCC/TAC/LAC for non-connected cells. Does not require root but location services have to be enabled to read full band/frequency data.
|-
| 9.0 || 5.2.7 || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || || All functionality mentioned in table works with LineageOS 16.0. For Dual SIM functionality, records up to 4G/3G/2G for primary SIM and 3G/2G for secondary SIM due to chipset limitation. Secondary SIM MNC recorded incorrectly (as the MNC of the primary SIM's network), even when MNC of secondary SIM's network is not the primary SIM network's MNC,  correct MNC for secondary SIM recorded only when primary SIM is disabled. "Record Neighbor Cells" works partially, but will return 214783647/65536/-1 for some fields such as MNC/MCC/TAC/LAC for non-connected cells. Does not require root but location services have to be enabled to read full band/frequency data.
|-
|OnePlus 5T || || 8.1 || 5.1.5 || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || || Band reading working without root.
|-
|OnePlus 6 || A6003 || 8.1 || 5.1.7 || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || {{No}} || Both SIMs 4G/3G/2G. Band reading working without root.
|-
|OnePlus 6T || A6013 || 9.0 || 5.2.6 || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || {{No}} || Both SIMs 4G/3G/2G. Band reading working without root. Must lock app to remain recording. Random gaps in trails recorded even when locked app.
|-
|OnePlus 7, 7 Pro || || 9.0 || 5.3 || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || {{No}} ||
|-
|OnePlus 7T || HD1903 || 10.0 || 5.3 || {{Yes}} || {{Yes}} || {{Yes}} || {{No}} ||  || Both SIMs 4G/3G/2G. Band and LTE Downlink Bandwidth reading working without root.
|-
|OnePlus 8 Pro || IN2023 || 10.0 || 5.4.3|| {{Yes}} || {{Yes}} || {{Yes}} || ||  || Both SIMs 4G/3G/2G. Maps LTE+NR tiles from eNB
|-
|OnePlus Nord || AC2003 || 11.0 || 5.5.2|| {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} ||  || Both SIMs 4G/3G/2G. Maps LTE+NR tiles from eNB
|}
</div>


=== OPPO ===
<div class="table-responsive">
<div class="table-responsive">
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Dual SIM || Support read Bands / Freq || Support read LTE_CA || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || API 7.0+ Support || Support read Bands / Freq || Support read LTE_CA || B66/71 Bug || 5G || More info
|-
|Oppo A5 (2020) || CPH1931 || 10 || 5.5.3 || || {{Yes}} || {{Yes}} || || || {{No}} || Dual SIM, 2G/3G/4G, Without SIM card it reads 2G GSM
|-
|-
|OnePlus One || || 5.1 / 4.4 || 4.X  || {{Yes}} || || {{Yes}} || || API 4.2 not working Android 5.0, but works on 4.4, 5.1+
|Oppo A54 || CPH2239 || 10 || || || || || || || {{No}} || Beware this model is based on a Mediatek MT6765 Helio P35.
|-
|-
|OnePlus Two || A2003 || 6.0.1 || 5.X || {{Yes}} || {{Partial}} || {{No}} || {{No}} || 3G on the first sim shows a wrong dbm value of -51
|Oppo A54 5G || CPH2195 || 11 || 5.5.3 || || {{Yes}} || {{Yes}} || {{Yes}} || || {{Yes}} || Dual SIMs read 2G/3G/4G/5G (NR SA/NSA), Reads LTE Downlink Bandwith MHz, LTE+NR, LTE-A. Displays only NSA NR Signal only.
|-
|-
|OnePlus Three / 3T || A3003 || 6.0.1 / 7.X || 5.X || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || Without root can read band data using new API and Android 7.0+. OnePlus battery saving may close app when you turn screen off. This is not CellMapper bug.
|Oppo A54 5G || CPH2195 || 12 || 5.5.4 || || {{Yes}} || {{Yes}} || {{No}} || || {{Yes}} || Since upgrading to Android 12 (ColourOS) LTE-A and LTE+NR dos not display in app!
|-
|-
|OnePlus X || ONE E1003 || 5.X.X || 4.1.6 || {{Partial}} || || {{No}} ||  
|Oppo A74 || CPH2219 || 11 || 5.5.3 || {{Yes}} || || {{Yes}} || {{Yes}} || || {{No}} || Full API 4.2 support for 4G/3G/2G on both SIMs and frequency without root permissions. Not tested API 7.0 support. Based on Qualcomm Snapdragon 662 chipset.
|-
|-
|OnePlus 5 || || 7.X || 5.1.1 || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || Band reading working without root.
|Oppo A74 5G || CPH2263 || 11 || || || || || || || {{Yes}} || Identical/Same as the OPPO A54 5G but with fewer 4G LTE bands. Not tested but everything should work the same as the A54 5G.
|-
|-
|OnePlus 6 || || 8.1 || 5.1.7 || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || Both SIMs 4G/3G/2G. Band reading working without root.
|}
|}
</div>
</div>


=== Oukitel ===
=== Oukitel ===
<div class="table-responsive">
{| class="wikitable table table-bordered"
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Dual SIM || Support read Bands / Freq || Support read LTE_CA  || B66/71 Bug || More info
|-
|Oukitel K600 Pro || K6000_Pro || 6.0 || 5.0.8 || || || || || ||
|-
|Oukitel K10000 || || 6.0 || 5.0.9 || {{Yes}} || || || || ||
|}
</div>


<div class="table-responsive">
=== realme ===
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Dual SIM || Support read Bands / Freq || Support read LTE_CA || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || B66/71 Bug || 5G || More info
|-
| realme C21Y || RMX3261 || 11 || 5.5.3 || {{Partial}} || {{Yes}} || || || {{No}} || Reports that the API doesn't work for 3G, but works for 2G/4G. Based on Unisoc T610 chipset. Needs more testing!
|-
|-
|Oukitel K600 Pro || K6000_Pro || 6.0 || 5.0.8 || || || || ||
| Realme 8 5G || RMX3241 || 12 || || || {{Yes}} || || || {{Yes}} || Based on MediaTek Dimensity 700. Needs more testing, Chipset supports 5G NSA mapping.
|-
|-
|Oukitel K10000 || || 6.0 || 5.0.9 || {{Yes}} || || || ||
| Realme 8 5G || RMX3241GDPR || 12 || || || || || || {{Yes}} || Based on MediaTek Dimensity 700. Needs more testing, Chipset supports 5G NSA mapping.
|}
|}
</div>
</div>


=== Samsung ===
=== Samsung ===
 
* Most Samsung phones support reading bands and frequency when Service Mode (*#0011#) is active. Using this feature you need to run Cellmapper in the background and have Service Mode in the foreground. That feature working with root and without. Please check manual [[Cellmapper_Field_Test_Reader|here]]. '''(Deprecated Since 5.1.4)'''
* Most Samsung phones support reading bands and frequency when Service Mode (*#0011#) is active. Using this feature you need to run Cellmapper in the background and have Service Mode in the foreground. That feature working with root and without. Please check manual [[Cellmapper_Field_Test_Reader|here]].
* Most Samsung Phones do not support Cell ID API 4.2 before Android 8. If you use a stock or custom Samsung Experience ROM (TouchWiz/OneUI) based on Android 8.0 "Oreo" or later, please use the Android 4.2+ CellID API. Note: This may not work on custom Samsung Experience ROMs ported from other devices than your own, or based on newer versions of Android than is officially available in stock Samsung Experience updates for your device. If you use a custom Samsung Experience ROM, please make sure it is based upon an official Samsung Experience stock ROM from your device model. Custom ROMs not based upon stock, such as LineageOS or ResurrectionRemix may not work for the 4.2+ CellID API.
* Most Samsung Phones do not support Cell ID API 4.2.
* In some devices Cell ID API 4.2 may show extra data compared to the old API, but most important parameters are invalid or missing. Do not use Cell ID API 4.2 for cellmapping, if the chart below displays your device incompatible. Failing to do so may cause invalid data being displayed on the map.
* In some devices Cell ID API 4.2 may show extra data compared to the old API, but most important parameters are invalid or missing. Do not use Cell ID API 4.2 for cellmapping, if the chart below displays your device incompatible. Failing to do so may cause invalid data being displayed on the map.
* To force 2G/3G/4G LTE only mode on samsung phones, The easy way is an app called [https://play.google.com/store/apps/details?id=com.cc.signalinfo Advanced Signal Status] however on certain samsung phones with 4.4.4 KitKat or newer, including Lollipop 5.x, it is also possible by dialing *#*#4636#*#*, then Device Information, and "Set preferred network type". This may require root on certain carriers. Tested and does not require root on AT&T (310-410).
* To force 2G/3G/4G LTE only mode on samsung phones, The easy way is an app called [https://play.google.com/store/apps/details?id=com.cc.signalinfo Advanced Signal Status] however on certain samsung phones with 4.4.4 KitKat or newer, including Lollipop 5.x, it is also possible by dialing *#*#4636#*#*, then Device Information, and "Set preferred network type". This may require root on certain carriers. Tested and does not require root on AT&T (310-410).
* To force an LTE Band on Samsung phones running 4.4.4, It is possible by dialing *#0011# > Back > INPUT type Q > INPUT 0000 wait for 15 seconds then you into Band Mode.
* To force an LTE Band on Samsung phones running 4.4.4, It is possible by dialing *#0011# > Back > INPUT type Q > INPUT 0000 wait for 15 seconds then you into Band Mode.
* Most Samsung phones can be rooted with [https://forum.xda-developers.com/showthread.php?t=1980683 CF-Auto-Root] 2G/3G/4G bands can be locked using [https://play.google.com/store/apps/details?id=com.qtrun.QuickTest Network Signal Guru] but only with most qualcomm chipset. Remember to set "Read qualcomm LTE data (root) under cellmapper app settings, exit and reload cellmapper and allow permissions for cellmapper.


<div class="table-responsive">
<div class="table-responsive">
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || B66/71 Bug || 5G ||More info
|-
|-
|Samsung Galaxy K Zoom || SM-C115 || 4.4.2 || 4.1.1 || {{No}} || || || May report incorrect TAC on LTE
|Samsung Galaxy K Zoom || SM-C115 || 4.4.2 || 4.1.1 || {{No}} || || || || || May report incorrect TAC on LTE
|-
|-
| Samsung Galaxy Ace Style LTE || SM-G357FZ || 4.4.4 ||4.1.4 || {{No}} || ||
| Samsung Galaxy Ace Style LTE || SM-G357FZ || 4.4.4 ||4.1.4 || {{No}} || || || || ||
|-
|-
| Samsung Galaxy Ace 4 LTE || SM-G357FZ || 4.4.4 || 4.1.1 || {{No}} || Root and service mode running foreground needed || || In some occasions rooted device may report some invalid data if the API 4.2 is enabled.
| Samsung Galaxy Ace 4 LTE || SM-G357FZ || 4.4.4 || 4.1.1 || {{No}} || Root and service mode running foreground needed || || || || In some occasions rooted device may report some invalid data if the API 4.2 is enabled.
|-
|-
| Samsung Galaxy Note 4 || SM-N910F || 6.0.1 || 4.1.4 || {{No}} || || ||  
| Samsung Galaxy Note 4 || SM-N910F || 6.0.1 || 4.1.4 || {{No}} || || || || ||
|-
|-
| Samsung Galaxy S3 Mini || GT-I8190N || 4.3 || 4.0.8 || {{No}} || {{No}} || || Report bad data on Stock Rom
| Samsung Galaxy S3 Mini || GT-I8190N || 4.3 || 4.0.8 || {{No}} || {{No}} || || || || Report bad data on Stock Rom
|-
|-
| Samsung Galaxy S3 4G || GT-I9305 || 4.4.4 || 4.1.1 || {{No}} || {{Yes}} || || Cellmapper Field Test Reader and with root working
| Samsung Galaxy S3 4G || GT-I9305 || 4.4.4 || 4.1.1 || {{No}} || {{Yes}} || || || || Cellmapper Field Test Reader and with root working
|-
|-
| rowspan="2" | Samsung Galaxy S4 || GT-I9506 || rowspan="2" | 5.0.1 || rowspan="2" | 4.1.1 ||{{No}} || rowspan="2" | Not tested || rowspan="2" | || rowspan="2" |  
| rowspan="2" | Samsung Galaxy S4 || GT-I9506 || rowspan="2" | 5.0.1 || rowspan="2" | 4.1.1 || {{No}} || Not tested || || || ||  
|-
|-
|GT-I9505 ||{{No}}
|GT-I9505 || {{No}} || Not tested || || ||
|-
|-
| rowspan="2" | Samsung Galaxy S5 || SM-G900A || rowspan="2" | 5.1.1 || rowspan="2" |  4.1.2 beta || {{Partial}} || rowspan="2" |  Root and service mode running foreground needed || rowspan="2" |  || rowspan="2" |  
| rowspan="2" | Samsung Galaxy S5 || SM-G900A || rowspan="2" | 5.1.1 || rowspan="2" |  4.1.2 beta || {{Partial}} || ||  || || || Root and service mode running foreground needed   
|-
|-
|SM-G900I||{{Partial}}  
|SM-G900I||{{Partial}} || || || ||
|-
|-
| Samsung Galaxy S5 Neo || SM-G903F || 6.X || 4.1.6 || || {{Yes}} || {{Yes}} ||  
| Samsung Galaxy S5 Neo || SM-G903F || 6.X || 4.1.6 || || {{Yes}} || {{Yes}} || || ||  
|-
|-
| Samsung Galaxy S6 || SM-G920F || 6.0.1 || 4.1.6 || {{Partial}} || {{Yes}} || {{Yes}} || Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem - service mode running foreground needed
| Samsung Galaxy S6 || SM-G920F || 6.0.1 || 4.1.6 || {{Partial}} || {{Yes}} || {{Yes}} || || || Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem - service mode running foreground needed
|-
|-
| Samsung Galaxy S6 Edge+ || SM-G920F || 6.0.1 || 4.1.6 || {{Partial}} || {{Yes}} || {{Yes}} || Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem - service mode running foreground needed
| Samsung Galaxy S6 Edge+ || SM-G920F || 6.0.1 || 4.1.6 || {{Partial}} || {{Yes}} || {{Yes}} || || || Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem - service mode running foreground needed
|-
|-
| Samsung Galaxy S7 || SM-G930F || 8.0.0 || 5.1.7 || {{Yes}} || {{Yes}} || {{Yes}} || Full API 4.2 support as of Android Oreo update. Older Android has only partial API 4.2 support. 2g-3g update cell info very infrequently and most of the times reports -51 dBm and no band info regardless of Android version.
| Samsung Galaxy S7 || SM-G930F || 8.0.0 || 5.1.7 || {{Yes}} || {{Yes}} || {{Yes}} || || || Full API 4.2 support as of Android Oreo update. Older Android has only partial API 4.2 support. 2g-3g update cell info very infrequently and most of the times reports -51 dBm and no band info regardless of Android version.
|-
|-
| Samsung Galaxy S8 || || 7.0 || 5.0.9 || {{Partial}} || {{Yes}} || {{Yes}} || Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem - service mode running
| Samsung Galaxy S8 || || 7.0 || 5.0.9 || {{Partial}} || {{Yes}} || {{Yes}} || || || Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem
|-
|-
| Samsung Galaxy Xcover 3 || SM-G388F || 5.1.1 || 4.1.1 || {{No}} || Not tested || ||
| Samsung Galaxy S8+  || SM-G955FD || 8.0.0 || 5.2.4 || {{Partial}} || {{Yes}} ||{{Yes}} || || || Full API 4.2 support for 4G Only as of Android Oreo update. 2g-3g old -51 dBm API bug as for all Exynos based models.
|-
|-
| rowspan="2" | Samsung Galaxy Core Prime || SM-G360F (EU) || 5.0.2 || 4.1.6 || {{No}} || {{Yes}} || rowspan="2" | || Root and service mode running foreground needed
| Samsung Galaxy S9 || SM-G960F || 10 || 5.5.3 || || {{Yes}} || {{Yes}} || || || Enable use Android 7.0+ Cell ID API and Record neighbor cells this maps 4G fine. Records 5G DCNR Status fine. Not tried 2G/3G.
|-
|-
| SM-G360FY (India) || 4.4.4 || 4.1.2 || {{No}} || || ||
| Samsung Galaxy S10 5G || SM-977B || 10.0 || 5.3.1 || {{Partial}} || {{Yes}} || {{Yes}} || || {{Yes}} || Only Exynos version supported record 5G tiles: [https://www.reddit.com/r/cellmapper/comments/c8d7xa/cellmapper_an_update_on_us_5g/ See]
|-
|-
| Samsung Galaxy A5 2015 || SM-A500FU || 6.0.1 || 5.0.7 || {{Partial}} || {{No}} || || Didn't tried with root. Without root, 4G looks like ok, but 3G shows wrong dBm.
| Samsung Galaxy Xcover 3 || SM-G388F || 5.1.1 || 4.1.1 || {{No}} || Not tested || || || ||
|-
|-
| Samsung Galaxy A5 2017 (EU) || SM-A520F || 6.0.1 || 5.X || {{Partial}} || {{No}} || ||
| rowspan="2" | Samsung Galaxy Core Prime || SM-G360F (EU) || 5.0.2 || 5.4.1 || {{Yes}} || {{Yes}} || || || || Root needed i used [https://autoroot.chainfire.eu/#odin CF-Auto-Root] 4G/3G/2G bands can be locked using [https://play.google.com/store/apps/details?id=com.qtrun.QuickTest Network Signal Guru] (Tested with version 2.11.2) once rooted, However without rooting it can still be used with basic information. 4G LTE bands supported 1(2100)/3(1800)/7(2600)/8(900)/20(800), LTE Cat4 Device.
|-
|-
| Samsung Rugby LTE || SGH-I547C || 4.1.2 || 4.1.4 || {{No}} || {{Yes}} || || Root and service mode running foreground needed. Bands can be forced with *#BAND#
| SM-G360FY (India) || 4.4.4 || 4.1.2 || {{No}} || || || ||
|-
|-
| Samsung Galaxy Alpha || SM-G850F || 5.0.2 || 5.0.7 || {{Partial}} || {{Yes}} || ||Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem - service mode running foreground needed
| Samsung Galaxy A5 2015 || SM-A500FU || 6.0.1 || 5.0.7 || {{Partial}} || {{No}} || || || || Didn't tried with root. Without root, 4G looks like ok, but 3G shows wrong dBm.
|-
| Samsung Galaxy A5 2017 (EU) || SM-A520F || 6.0.1 || 5.X || {{Partial}} || {{No}} || || || ||
|-
| Samsung Galaxy A5 (2017)  || SM-A520F || 8.0.0 || 5.X || {{Partial}} || {{Yes}} ||{{Yes}} || || || Full API 4.2 support for 4G Only as of Android Oreo update. 2g-3g old -51 dBm API bug as for all Exynos based models.
|-
| Samsung Galaxy A13 5G (US) || SM-A136U || 12 || 5.3.3 || || {{Yes}} || {{Yes}} || || {{Yes}} || Displays lots of NSA info NR SS, NR PCI, Band Name/Name and RFCN
|-
| Samsung Galaxy A20s || SM-A207F/DS || 10.0 || 5.5.3 || {{Yes}} || {{Yes}} || {{Yes}} || || || Full API 4.2 support for 4G/3G/2G w/o root. In some rare occasions, API 4.2 may report additional extra data and no band infomation on 2G/3G if enabled API 4.2. Does not require root but location services have to be enabled to read full band/frequency data.
|-
| Samsung Galaxy A30 || SM-A305GN/DS || 10.0 || 5.5.3 || {{Partial}} || {{Yes}} || {{Yes}} || || || Reads only 4G band/freq data on both SIMs. API 4.2+ reads -51 dBm and additional extra data on 2G/3G if enabled API 4.2. API 4.2 bug as for all Exynos based models. Does not require root but location services have to be enabled to read full band/frequency data.
|-
| Samsung Galaxy A50 || SM-A505G || 11.0 || 5.5.3 || {{Partial}} || {{Yes}} ||{{Yes}} || || || Full API 4.2 support for 4G Only. 2g-3g old -51 dBm API bug as for all Exynos based models.
|-
| Samsung Galaxy Tab A (2018, 10.5)  || SM-T595 || 8.1.0 || 5.2.4 || {{Yes}} || {{Yes}} ||{{Yes}} || || || Working perfect in 2G/3G/4G w/o root
|-
| Samsung Rugby LTE || SGH-I547C || 4.1.2 || 4.1.4 || {{No}} || {{Yes}} || || || || Root and service mode running foreground needed. Bands can be forced with *#BAND#
|-
| Samsung Galaxy Alpha || SM-G850F || 5.0.2 || 5.0.7 || {{Partial}} || {{Yes}} || || || ||Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem - service mode running foreground needed
|-
|rowspan=2 | Samsung Galaxy J3 || SM-J320FN || rowspan=2 | 5.1.1 || rowspan=2 | 5.3.0 || {{Yes}} || {{Yes}} || || || || Working perfectly in 2G/3G w/o root. Not tested yet for 4G
|-
| SM-J320G || {{Yes}} || {{Yes}} || || || || Working perfectly in 2G/3G/4G w/o root.
|-
| Samsung Galaxy J4 || SM-J400M || 8.0.0 || 5.2.7 || {{Yes}} || {{Yes}} || || || || Working perfectly in 2G/3G w/o root. Not tested yet for 4G
|-
| Samsung Galaxy J8 || SM-J810Y/DS || 9.0 || 5.5.3 || {{Yes}} || {{Yes}} || {{Yes}} || || || Full API 4.2 support for 4G/3G/2G on both SIMs w/o root. Based on Qualcomm Snapdragon 450 chipset.
|-
|-
| Samsung Galaxy S9 || SM-G960F || 8.0.0 || 5.1.7 || {{Partial}} || {{Yes}} || ||Only Enable API 4.2 for 4G only. 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem - service mode running foreground needed
|}
|}
</div>
</div>


=== Sony ===
=== Sony ===
* Mostly Sony Phones support API 4.2
* Mostly Sony Phones support API 4.2
* Some phones can read Bands / Frequency on Field Test Mode ( *#*#*386#*#* or *#*#*585*0000#*#* ). If not opening, you need install apk file (Please search on Google more information).  
* Some phones can read Bands / Frequency on Field Test Mode ( *#*#*386#*#* or *#*#*585*0000#*#* ). If not opening, you need install apk file (Please search on Google more information).  
Line 416: Line 498:
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || B66/71 Bug || More info
|-
|Sony Xperia E3 || D2203 || 4.4.4 || 4.1.1 || {{Yes}} || {{Partial}} || || || Reading Bands/Freq needs to have field test mode is running. LTE Cat4 device.
|-
|Sony Xperia M5 || E5603 || 6.0.1 || 4.1.6 || {{Yes}} || || || || LTE Cat4 device.
|-
|-
|Sony Xperia E3 || D223 || 4.4.4 || 4.1.1 || {{Yes}} || Yes limited if field test mode is not running || || Dont forget you can select all bands like 2G/4G only in the menu
|Sony Xperia Z || C6602 || 5.1.1 || 5.1 || {{Yes}} || {{No}} || || || LTE Cat3 device. Upgradable to 5.1.1
|-
|-
|Sony Xperia E4 || E2105 || || || {{No}} || ||
|Sony Xperia Z3 Compact || D5833 || 6.0 || 5.1.7 || {{Yes}} || {{Partial}} || || || LTE Cat4 device. Reads Bands/Freq only with rooted device.
|-
|-
|Sony Xperia M5 || E5603 || 5.1 || 4.1.6 || {{Yes}} || || ||
|Sony Xperia Z3 || D6603 || 6.0 || 4.1.2 Beta || {{Yes}} || || || || LTE Cat4 device.
|-
|-
|Sony Xperia V || Xperia_V || 6.0 || 5.X || || || || maybe report wrong RSRP
|Sony Xperia Z5 Compact || E5803 / E5823 || 7.1.1 || 5.X || {{Yes}} || {{Yes}} || || || With Android 7+ can read band data without root
|-
|-
|Sony Xperia Z || C6602 || 4.X || 5.1 || {{Yes}} || {{No}} || ||
|Sony Xperia Z5 || E6653 || 7.1.1 || 5.1.5 || {{Yes}} || {{Yes}} || {{Yes}} || || LTE-A Cat6 device.
|-
|-
|Sony Xperia Z3 Compact || D5833 || 6.0.1 || 5.1.7 || {{Yes}} || Yes, with root || ||
|Sony Xperia Z4v || SOV31 (KDDI Japan) || 7.0 || 5.1.5 || {{Yes}} || {{Yes}} || || || LTE-A Cat6 device.
|-
|-
|Sony Xperia Z3 || D6603 || 5.1.1 || 4.1.2 Beta || {{Yes}} || Not tested || ||
|Sony Xperia X Compact || F5321 || 8.0 || 5.5.2 || {{Yes}} || {{Yes}} || || || Special: can sample MOCN with correct MNC.
|-
|-
|Sony Xperia Z5 Compact || E5803 / E5823 || 7.0 || 5.X || {{Yes}} || {{Yes}} || || With Android 7+ can read band data without root
|Sony Xperia XA || F3111 || 7.0 || 5.1.1 || {{Yes}} || {{No}} || || || LTE Cat4 device.
|-
|-
|Sony Xperia Z5 ||  E6653 || 7.1.1 || 5.1.5 || {{Yes}} || {{Yes}} || {{Yes}} ||
|Sony Xperia XZ ||  F8331 (EU) || 8.0 || 5.x || {{Yes}} || {{Yes}} || {{Yes}} || || LTE-A (3CA) Cat9
|-
|-
|Sony Xperia Z4 || SOV31 (KDDI Japan)|| 7.0 || 5.X || {{Yes}} || {{Yes}}
|Sony XZ Premium || G8142 || 9.0 || 5.x || {{Yes}} || {{Yes}} || {{Yes}} || || LTE-A (2CA) Cat16
|
|-
|-
|Sony Xperia XA
|Sony XZ1 || || 9.0 || 5.x || {{Yes}} || {{Yes}} || {{Yes}} || || LTE-A (4CA) Cat16
|F3111
|7.0
|5.1.1
|{{Yes}}
|{{No}}
|
|
|-
|-
|Sony Xperia XZ || F8331 || 7, 8 || 5.x || {{Yes}} || {{Yes}} || {{Yes}} ||
|Sony XZ2 Compact (Dual-SIM)|| H8324 || 9 || 5.2.3 || {{Yes}} || {{Yes}} || {{Yes}} || || LTE-A (4CA) Cat15
|-
|-
|Sony XZ Premium || || 7 || 5.x || {{Yes}} || {{Yes}} || {{Yes}} ||
|Sony XZ2 (Dual-SIM)|| H8266 || 9 || 5.2.1 || {{Yes}} || {{Yes}} || {{Yes}} || || LTE-A (5CA) Cat18
|-
|-
|Sony XZ1 || || 8 || 5.x || {{Yes}} || {{Yes}} || {{Yes}}  ||
|Sony Xperia 1 || J9110  || 9 || 5.3 || {{Yes}} || {{Yes}} || {{Yes}}  || || LTE-A Cat19 device.
|-
|-
|Sony Xperia SP || C5303 || 4.3 || 5.0.7 || {{No}} || {{No}} || || If signal strength is more than about -80dBm, the phone will randomly report either very high (-44dBm) or very low (-120dBm) signal strength
|Sony Xperia 10 II || XQ-AU52  || 11 || 5.5.0 || {{Yes}} || {{Yes}} || || || LTE-A Cat11 device.
|}
|}
</div>
</div>


=== Umidigi ===
=== vivo ===
* Some model maybe not working or not support API 4.2+.


<div class="table-responsive">
<div class="table-responsive">
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || B66/71 Bug || 5G || More info
|-
|-
|Z Pro || UMIDIGI_Z || 6.0 || 5.1.0 || {{Partial}} || || || On API 4.2+, RSRQ report 0 and maybe incorrect SINR also
| vivo Y11 (2019) || vivo 1906 || 11 || 5.5.4 || {{Yes}} || {{Yes}} || || || {{no}}|| Full API 4.2 support for 4G/3G/2G on both SIMs and frequency without root permissions. Based on Qualcomm Snapdragon 439 chipset.
|-
|-
|Z1 || || 7.0 || 5.x || {{Partial}} || || || Reports that the API doesn't work for 3G, but works for 2G/4G.  
| vivo Y20i || V2032 || 10 || 5.5.3 || {{Yes}} || {{Yes}} || || || {{no}}|| Full API 4.2 support for 4G/3G/2G on both SIMs and frequency without root permissions. Based on Qualcomm Snapdragon 460 chipset.
|-
| vivo Y91 || vivo 1811 || 8.1.0 || 5.5.3 || {{Yes}} || {{Yes}} || || || {{no}}|| Full API 4.2 support for 4G/3G/2G on both SIMs and frequency without root permissions. Based on Qualcomm Snapdragon 439 chipset.
|}
|}
</div>
</div>


=== Vodafone ===
=== Vodafone ===
<div class="table-responsive">
<div class="table-responsive">
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || B66/71 Bug || More info
|-
|-
|Vodafone Smart turbo 7 || VFD 500  || 6.0 || 5.0.9 || {{Partial}} || {{No}} || Reports incorrect 2G/3G data. Check GPS is OK when leaving areas with poor/no GPS. Check MNC is right on 4.2 API.
|Vodafone Smart Turbo 7 || VFD 500  || 6.0 || 5.0.9 || {{Partial}} || {{No}} || || Reports incorrect 2G/3G data. Check GPS is OK when leaving areas with poor/no GPS. Check MNC is right on 4.2 API. Based on a Mediatek MT6735M
|-
|-
|}
|}
Line 484: Line 564:


=== Xiaomi ===
=== Xiaomi ===
* Some model maybe not working.  
* Some model maybe not working.  


Line 490: Line 569:
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Dual SIM || Support read Bands / Freq || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Dual SIM || Support read Bands / Freq || B66/71 Bug || 5G || More info
|-
| 11T || 21081111RG || 11 || 5.5.3 || {{Yes}}  || {{Yes}} || {{Yes}} || || {{yes}} || MediaTek Dimensity 1200 5G; 4G LTE LAC may be 65535. Working perfect in 2G/3G/4G/5G on both SIM w/o root. Needs more testing.
|-
|Mi A1 || || 9.0.0 || 5.3.0 || {{Yes}}  || {{Yes}} || {{Yes}} || || || 4G/3G/2G on both SIM, LTE-A 2CA Cat6, Snapdragon 625
|-
|Mi Mix 2 ||  || 9.0.0 || 5.X || {{Yes}}  || {{Yes}} || {{Yes}} || || || Working perfect in 4G/3G/2G w/o root. 4G/3G/2G on one sim, only 3G/2G on the other, Snapdragon 835
|-
|Mi Mix 3 5G || Andromeda_EEA || 9.0.0 || 5.4.3 || {{Yes}}  || {{No}} || {{Yes}} || || {{yes}} || 5G band supported only n78 NSA, LTE-A 5CA, Snapdragon 855
|-
|Redmi 4 Prime || MMB29M|| 6 || 5.0.8 || {{Partial}} || || || || || LTE-A 2CA Cat6
|-
|Redmi 4x || Redmi 4X 4/64|| 7.1.2 || 5.2.3 || {{yes}} ||{{Yes}} || || || || Working perfect in 4G/3G/2G w/o root.
|-
|Redmi 6A || M1804C3CE || 9.0.0 || 5.5.3 || {{Yes}} || {{Yes}} || {{Yes}} || || || MediaTek Helio A22; 4G LTE LAC may be 65535. Working perfect in 4G/3G/2G w/o root.
|-
| Redmi 7 || M1810F6LE || 10.0 || 5.5.3 || {{Yes}} || {{Yes}} || {{Yes}} || || || Working perfect in 4G/3G/2G on both SIMs. However, locking bands needs root. Snapdragon 632.
|-
|rowspan=3 |Redmi 7A|| M1903C3EC (China) || 10.0 || 5.5.1 || {{Yes}} || {{Yes}} || {{Yes}} || || || rowspan=3 |Working perfect in 4G/3G/2G on both SIMs. However, locking bands needs root. Snapdragon 439
|-
| M1903C3EE (EEA) || 10.0 || 5.5.3 || {{Yes}} || {{Yes}} || {{Yes}} || ||
|-
| M1903C3EG (Global) || 9.0 || 5.4.5 || {{Yes}} || {{Yes}} || {{Yes}} || ||
|-
| Redmi 8 || M1908C3IG || 11.0.11 || 5.4.3 || {{Yes}} || {{Yes}} || {{Yes}} || || || Working perfect in 4G/3G/2G w/o root. 4G on both SIM. Snapdragon 439
|-
|Redmi Note 2 || || 5.0.2 || 4.1.6 || {{Partial}} || || || || ||Old API not working, new API working. LTE Cat4
|-
|Redmi Note 3 (Snapdragon) || || 6.0.1 || 5.0.9 || || || || || || Old API fine, LTE-A Cat6
|-
|Redmi Note 3 (MediaTek) || || 5.0.2 || || || || || || || Not tested but Beware theres a Mediatek model based on MT6795 Helio X10
|-
|Redmi Note 4 (Snapdragon) || || 7.0.0 || 5.1.7 || {{Yes}} || {{Yes}} || || || || one SIM: 2G/3G/4G other: 2G/3G, LTE-A 2CA Cat6, Snapdragon 625
|-
|-
|Mi 4c 32GB || || 5.1.1 || 5.0.7 || {{Partial}} || || {{Partial}} || Reads band in 4G with Qualcomm + root method. Shows nothing without root with new API (blank).
|Redmi Note 4 (MediaTek) || || 6.0 || || || || || || || Not tested but beware theres a Mediatek model based on MT6797 Helio X20
|-
|-
|Mi 5 || MI_5 || 7.0 || 5.0.5 || {{Yes}} || || {{Yes}} || API 4.2+ working on 4G. Android 4.2+ can read band data.
|Redmi Note 5 AI || M1803E7SG|| 8.1.0 || 5.2.3 || {{yes}} ||{{Yes}} || || || || Working perfect in 4G/3G/2G w/o root. Snapdragon 636
|-
|-
|Mi A1 || || 8.0 || 5.1.6 || {{Yes}} || {{Partial}} || {{Yes}} || 4g/3g/2g on one sim, only 3g on the other.
|Redmi Note 8 (2019) || M1908C3JE || 10.0 || 5.5.3 || {{Yes}} || {{Yes}} || {{Yes}} || || || Full API 4.2 support for 4G/3G/2G on both SIMs and frequency without root permissions. However, locking bands needs root. LTE-A (4CA) Cat12
|-
|-
|Redmi_Note_2 || || 5.0.2 || 4.1.6 || {{Partial}} || || || Old API not working, new API working
|Redmi Note 8 (2021) || M1908C3JGG || 11 (MIUI 12.5) || || || || || || || Not tested but based on a MediaTek Helio G85
|-
|-
|Redmi_Note_3 || Redmi_Note_3 || 6.0.1 || 5.0.9 || || || || Old API fine
|Redmi Note 8 PRO|| M1906G7G || 9.0.0 || 5.4.1 || {{Yes}} || {{Yes}} || {{Yes}} || || || MTK; 2G/3G LAC may be 65535. Working good without root. 4G on both SIM. Based on a Mediatek, Helio G90T
|-
|-
|Redmi 4 Prime || MMB29M|| 6 || 5.0.8 || {{Partial}} || || ||
|Redmi Note 8T|| M1908C3XG || 9.0.0 || 5.4.1 || {{Yes}} || {{Yes}} || {{Yes}} || || || Qualcomm; +LTE Downlink Bandwidth, LTE-A 4CA Cat12, Snapdragon 665
|-
|-
|Redmi Note 4 Snapdragon || || 7.0.0 || 5.1.7 || {{Yes}} || {{Yes}} || || one SIM: 2G/3G/4G other: 2G/3G
|Mi 4c 32GB ||  || 5.1.1 || 5.0.7 || {{Partial}} || {{Partial}} ||  {{Partial}} || || || Reads band with Qualcomm + root method. Shows nothing without root with new API (blank). 4G/3G/2G on one sim, only 3G/2G on the other. LTE Cat 4
|-
|Mi 4c 16GB ||  || 7.1.2 || 5.2.4 || {{Yes}} || {{Partial}} || {{Yes}} || || || Working perfect in 4G/3G/2G w/o root. 4G/3G/2G on one sim, only 3G/2G on the other. LTE Cat 4
|-
|rowspan=2 |Mi 5 || MI_5 || 7.0 || 5.0.5 || {{Yes}}  || {{Partial}} || {{Yes}} || || || API 4.2+ working on 4G. Android 4.2+ can read band data. LTE-A 3CA Cat12
|-
|  || 8.0.0 || 5.2.4 || {{Yes}}  || {{Partial}} || {{Yes}} || || || Working perfect in 4G/3G/2G w/o root. 4G/3G/2G on one sim, only 3G/2G on the other.
|-
|Mi 6 ||  || 8.0.0 || 5.2.4 || {{Yes}}  || {{Yes}} || {{Yes}} || || || Working perfect in 4G/3G/2G w/o root. LTE-A 3CA Cat9, Snapdragon 835
|-
|Mi 8 || M1803E1A || 10.0 || 5.4.3 || {{Yes}} || {{Yes}} || {{Yes}} || || || 2G/3G/4G on both SIM, LTE-A 4CA Cat16, Snapdragon 845
|-
|Mi 9 || || 10.0 || 5.4.3 || {{Yes}} || {{Yes}} || {{Yes}} || || || 2G/3G/4G on both SIM, LTE-A 5CA Cat18, Snapdragon 855
|-
|Mi 9T Pro || M1903F11G || 10.0 || 5.4.3 || {{Yes}} || {{Yes}} || {{Yes}} || || || 2G/3G/4G on both SIM, Snapdragon 855
|-
|Mi 10 Lite 5G || M2002J9G || 11 || 5.5.3 || {{Yes}} || {{Yes}} || {{Yes}} || || {{Yes}} || 2G/3G/4G/5G on both SIM, Snapdragon 765G 5G (X52 modem, LTE-A 4CA Cat18). Bands can be locked on SIM1 with launching the com.android.settings.MiuiBandMode activity.
|-
|Mi Pad 4 LTE || || 9.0.0 || 5.3.0 || {{Yes}} || {{No}} || {{Yes}} || || || 4G only. LTE-A 3CA Cat12, Snapdragon 660
|}
|}
</div>
</div>


=== ZTE ===
=== ZTE ===
<div class="table-responsive">
<div class="table-responsive">
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || More info
!Phone Name || Model Number || Android Version || Cellmapper version || API 4.2 Support || Support read Bands / Freq || Support read LTE_CA || B66/71 Bug || More info
|-
|-
|AOSON M701FD || M701FD || 5.1 LMY47D || || {{No }} || || || Signal incorrect on old API, do not use
|AOSON M701FD || M701FD || 5.1 LMY47D || || {{No }} || || || || Signal incorrect on old API, do not use
|-
|-
|BLADE A470 || A470  || 5.1.1 || 4.1.6 || {{Yes}} || {{Yes}} || || Works all new API 2g 3g 4g also without sim , read lte band with root , but no info band and no block band
|BLADE A470 || A470  || 5.1.1 || 4.1.6 || {{Yes}} || {{Yes}} || || || Works all new API 2g 3g 4g also without sim , read lte band with root , but no info band and no block band
|-
|-
|BLADE A110 || || 5.1 || 5.0.7 || || || ||Old API works 4G
|BLADE A110 || || 5.1 || 5.0.7 || || || || ||Old API works 4G
|-
|-
|ZTE Grand X3 || Z959 || 5.1.1 || || {{yes}} || || ||
|ZTE Grand X3 || Z959 || 5.1.1 || || {{yes}} || || || ||
|-
|-
|ZTE Axon 7 || A2017U || 6.0.1 || 5.0.3 || {{Yes}} || {{Yes}} || {{Yes}} || Without root can read band data using new API and Android 7.0+
|ZTE Axon 7 || A2017U || 6.0.1 || 5.0.3 || {{Yes}} || {{Yes}} || {{Yes}} || || Without root can read band data using new API and Android 7.0+
|}
|}
</div>
</div>
Line 532: Line 660:
{| class="wikitable table table-bordered"
{| class="wikitable table table-bordered"
|-
|-
!Manufacture || Phone Name ||  Model Number || Android Version || Cellmapper version || API 4.2 Support || Dual SIM || Support read Bands / Freq || More info
!Manufacture || Phone Name ||  Model Number || Android Version || Cellmapper version || API 4.2 Support || Dual SIM || Support read Bands / Freq || B66/71 Bug || More info
|-
|-
|Allview || Allview P5 Lite || || 6.0 || 5.0.7 || {{Yes}} || || ||
|Allview || Allview P5 Lite || || 6.0 || 5.0.7 || {{Yes}} || || || ||
|-
|-
|BlackView || BlackView BV600 || || 6.0 || 5.X || {{Partial}} || || || New API ok 4G, please test more
|BlackView || BlackView BV600 || || 6.0 || 5.X || {{Partial}} || || || || New API ok 4G, please test more
|-
|-
|Fly || Fly FS406 || FS406 || 6.0 || 5.X || {{Yes}} || || || Old API not working, so use new api
|BQ || BQ Rich || BQ-5012L || 7.0 || 5.X || {{Yes}} || {{Yes}} || {{Yes}} || || New API ok 4G/3G, other SIM is 2G
|-
|-
|InFocus || InFocus M370 || || 6.0.1 || 5.X || {{Yes}} || {{Yes}} || || Dual SIM working on API 4.2+ 4G+2G
|Fly || Fly FS406 || FS406 || 6.0 || 5.X || {{Yes}} || || || || Old API not working, so use new api
|-
|-
|LYF || LYF Wind 4 || LS-5014 || 5.1.1 || 4.1.6 || {{Partial}} || || || Old API fine, API 4.2+ on 4G
|InFocus || InFocus M370 || || 6.0.1 || 5.X || {{Yes}} || {{Yes}} || || || Dual SIM working on API 4.2+ 4G+2G
|-
|-
|SPRD || Smart Max 4.0 Plus || SMART_MAX_4.0_PLUS || 5.1.1 || || {{No}} || || ||  
|LYF || LYF Wind 4 || LS-5014 || 5.1.1 || 4.1.6 || {{Partial}} || || || || Old API fine, API 4.2+ on 4G
|-
|Senseit || Senseit N151 || N151 || 7.0 || 5.X || {{Yes}} || {{Yes}} || {{Yes}} || || New API ok 4G/3G, other SIM is 2G
|-
|SPRD || Smart Max 4.0 Plus || SMART_MAX_4.0_PLUS || 5.1.1 || || {{No}} || || || ||
|-
|UMIDIGI || || UMIDIGI_Z || 6.0 || 5.1.0 || {{Partial}} || || || || On API 4.2+, RSRQ report 0 and maybe incorrect SINR also
|-
|UMIDIGI || Z Pro || || 7.0 || 5.x || {{Partial}} || || || || Reports that the API doesn't work for 3G, but works for 2G/4G. based on MediaTek Helio X27
|}
|}
</div>
</div>


=== Windows 10 Mobile (all manufacturers) ===
=== Windows 10 Mobile (all manufacturers) ===
* Requirements: Windows 10 Mobile RTM or newer
* Requirements: Windows 10 Mobile RTM or newer
* Support read Bands / Freq: Yes
* Support read Bands / Freq: Yes
* Required 512MB RAM, more than 1GB recommended
* Required 512MB RAM, more than 1GB recommended
<div class="table-responsive">
{| class="wikitable table table-bordered"
|-
!Manufacture || Phone Name ||  Model Number || Dual SIM || More info
|-
|HP || Elite X3 || || No || 4G LTE band supported 1, 2, 3, 4, 5, 7, 8, 12, 17, 19, 20, 26, 28, 29, 38, 39, 40, 41
|-
|Microsoft || Lumia 950 || RM-1105 || No || 4G LTE band supported 1, 2, 3, 4, 5, 7, 8, 12, 17, 20, 28, 38, 40, 41
|-
|Microsoft || Lumia 950 XL || RM-1085 || No || 4G LTE band supported 1, 2, 3, 4, 5, 7, 8, 12, 17, 20, 28, 38, 40, 41
|}
</div>


== Unsupported ==
== Unsupported ==
* Jolla, you can try but not officiality supported //7.1.2017
* Jolla, you can try but not officiality supported //7.1.2017
* Xiaomi MI MIX - Cell ID API not working //5.1.2017
* Xiaomi MI MIX - Cell ID API not working //5.1.2017
* DIGNO 202K (Softbank) - OLD API not working
* DIGNO 202K (Softbank) - OLD API not working
* Alcatel OneTouch P350X - OLD API not working
* Alcatel OneTouch P350X - OLD API not working
* Vivo Y53 - OLD API and Cell ID API not working
Francisuk1989
195

edits

Retrieved from "https://docs.cellmapper.net/mw/Special:MobileDiff/21005...93679"

Navigation menu