| H850 |
6.X+ |
4.1.7 |
Yes |
Yes |
With Android 6, dbm are correct on 2G, 3G and 4G (but you cannot read band without root). It maps also without SIM, and has band lock. With Android 7.0+ you can even read band without root for 2G, 3G and 4G, and everything is working.
|
}
Motorola
| Phone Name |
Model Number |
Android Version |
Cellmapper version |
API 4.2 Support |
Support read Bands / Freq |
More info
|
| Motorola Moto G 4G (2015) |
XT1072 |
5.0.2 |
5.X |
Partial |
|
3G reports wrong RSCP.
|
| Motorola Moto G LTE 2014 |
XT1039 |
6.x |
5.x |
Partial |
Partial |
Reads only 4G band/freq data, and only with root. 4.2+API not working for 2G/3G.
|
| Motorola Moto G Play |
XT1609 |
6.0.1 |
|
Yes |
|
|
| Motorola Moto G4 Plus |
XT1642 (EU) |
6.0.1 / 7.0 |
5.X |
Yes |
Yes |
Reading Dual SIM's, enable API4.2+. Support LTE+3G reading. With Android 7+ Band reading not need root
|
| XT1644 |
6.0 |
5.x |
Partial |
Yes |
NEW API correct only 2g-4g , 3g dbm not good , dual sim with 4g+2g
|
| Motorola Charm |
MB-502 |
2.2 |
4.1.2 Beta |
Yes |
Yes |
|
| Motorola Moto E 2nd generation LTE |
XT1527 (US) |
5.0.1 |
4.1.2 Beta |
Yes |
Yes |
Can map without SIM card with new API
|
| XT1524 (EU version) |
5.x / 6.x |
4.1.5 |
Partial |
Yes |
NEW API correct only 2g-4g , 3g dbm not good
|
| Motorola Moto G 3rd Generation |
XT1541 |
6.0.1 |
5.0.7 |
Yes |
Yes |
Requires root for reading bands/frequency data
|
OnePlus
| Phone Name |
Model Number |
Android Version |
Cellmapper version |
API 4.2 Support |
Dual SIM |
Support read Bands / Freq |
More info
|
| OnePlus One |
|
5.1 / 4.4 |
4.X |
Yes |
|
Yes |
API 4.2 not working Android 5.0, but works on 4.4, 5.1+
|
| OnePlus Two |
|
6.X |
4.X |
No |
|
|
|
| OnePlus Three / 3T |
A3003 |
6.0.1 / 7.X |
5.X |
Yes |
Yes |
Yes |
Without root can read band data using new API and Android 7.0+
|
| OnePlus X |
ONE E1003 |
5.X.X |
4.1.6 |
Partial |
|
No |
|
Samsung
- Most Samsung phones support reading bands and frequency when Service Mode (*#0011#) is active. Using this feature you need to run Cellmapper in the background and have Service Mode in the foreground. That feature working with root and without. Please check manual: https://www.cellmapper.net/mw/index.php/Cellmapper_Field_Test_Reader
- Most Samsung Phones do not support Cell ID API 4.2.
- In some devices Cell ID API 4.2 may show extra data compared to the old API, but most important parameters are invalid or missing. Do not use Cell ID API 4.2 for cellmapping, if the chart below displays your device incompatible. Failing to do so may cause invalid data being displayed on the map.
- To force 2G/3G/4G LTE only mode on samsung phones, The easy way is an app called Advanced Signal Status however on certain samsung phones with 4.4.4 KitKat or newer, including Lollipop 5.x, it is also possible by dialing *#*#4636#*#*, then Device Information, and "Set preferred network type". This may require root on certain carriers. Tested and does not require root on AT&T (310-410).
- To force an LTE Band on Samsung phones running 4.4.4, It is possible by dialing *#0011# > Back > INPUT type Q > INPUT 0000 wait for 15 seconds then you into Band Mode.
| Phone Name |
Model Number |
Android Version |
Cellmapper version |
API 4.2 Support |
Support read Bands / Freq |
Support read LTE_CA |
Supported LTE Band |
Supported LTE-CA Bands |
More info
|
| Samsung Galaxy K Zoom |
SM-C115 |
4.4.2 |
4.1.1 |
No |
|
|
|
|
May report incorrect LAC on LTE
|
| Samsung Galaxy Ace 4 LTE |
SM-G357FZ |
4.4.4 |
4.1.1 |
No |
Root and service mode running foreground needed |
|
|
|
In some occasions rooted device may report some invalid data if the API 4.2 is enabled.
|
| Samsung Galaxy S3 Mini |
GT-I8190N |
4.3 |
4.0.8 |
No |
No |
|
|
|
Report bad data on Stock Rom
|
| Samsung Galaxy S3 4G |
GT-I9305 |
4.4.4 |
4.1.1 |
No |
Yes |
|
|
|
Cellmapper Field Test Reader and with root working
|
| Samsung Galaxy S4 |
GT-I9506 |
5.0.1 |
4.1.1 |
No |
Not tested |
|
|
|
|
| Samsung Galaxy S5 |
SM-G900A |
5.1.1 |
4.1.2 beta |
Partial |
Root and service mode running foreground needed |
|
|
|
|
| Samsung Galaxy S5 Neo |
SM-G903F |
6.X |
4.1.6 |
|
Yes |
Yes |
|
|
|
| Samsung Galaxy S6 |
SM-G920F |
6.0.1 |
4.1.6 |
Partial |
Yes |
Yes |
B3, B7, B20 |
B3+B20, B3+B7 |
Only Enable API 4.2 for 4G only . 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem - service mode running foreground needed
|
| Samsung Galaxy S6 Edge+ |
SM-G920F |
6.0.1 |
4.1.6 |
Partial |
Yes |
Yes |
|
|
Only Enable API 4.2 for 4G only . 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem - service mode running foreground needed
|
| Samsung Galaxy S7 |
SM-G930F |
6.0.1 |
4.1.6 |
Partial |
Yes |
Yes |
|
|
Only Enable API 4.2 for 4G only . 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem - service mode running foreground needed
|
| Samsung Galaxy Xcover 3 |
SM-G388F |
5.1.1 |
4.1.1 |
No |
Not tested |
|
|
|
|
| Samsung Galaxy Core Prime (Europe) |
SM-G360F |
4.4.4, 5.0.2 |
4.1.1, 4.1.6 |
No |
Yes |
|
|
|
Root and service mode running foreground needed
|
| Samsung Galaxy A5 2015 |
SM-A500FU |
6.0.1 |
5.0.7 |
Partial |
No |
|
|
|
Didn't tried with root. Without root, 4G looks like ok, but 3G shows wrong dBm.
|
| Samsung Galaxy A5 2017 (EU) |
|
6.0.1 |
5.X |
Partial |
No |
|
|
|
|
| Samsung Rugby LTE |
SGH-I547C |
4.1.2 |
4.1.4 |
No |
Yes |
|
|
|
Root and service mode running foreground needed. Bands can be forced with *#BAND#
|
| Samsung Galaxy Alpha |
SM-G850F |
5.0.2 |
5.0.7 |
Partial |
Yes |
|
|
|
Only Enable API 4.2 for 4G only . 2G-3G reads errors if enabled API 4.2 - also old api 2g-3g problem - service mode running foreground needed
|
Sony
- Mostly Sony Phones support API 4.2
- Some phones can read Bands / Frequency on Field Test Mode ( *#*#*386#*#* or *#*#*585*0000#*#* ). If not opening, you need install apk file (Please search on Google more information).
- Sony XZ Global see supported bands: *#*#7378423#*#*
| Phone Name |
Model Number |
Android Version |
Cellmapper version |
API 4.2 Support |
Support read Bands / Freq |
Supported LTE-CA Bands |
More info
|
| Sony Xperia E3 |
D223 |
4.4.4 |
4.1.1 |
Yes |
Yes limited if field test mode is not running |
|
Dont forget you can select all bands like 2G/4G only in the menu
|
| Sony Xperia E4 |
E2105 |
|
|
No |
|
|
| Sony Xperia M5 |
E5603 |
5.1 |
4.1.6 |
Yes |
|
|
|
| Sony Xperia Z |
C6602 |
4.X |
5.1 |
Yes |
No |
|
|
| Sony Xperia Z3 |
D6603 |
5.1.1 |
4.1.2 Beta |
Yes |
Not tested |
|
|
| Sony Xperia Z5 Compact |
E5803 / E5823 |
7.0 |
5.X |
Yes |
Yes |
|
With Android 7+ can read band data without root
|
| Sony Xperia Z5 |
E6653 |
5.1.1 |
4.1.0 |
Yes |
|
|
|
| Sony Xperia XZ |
F8331 |
7 |
5.x |
Yes |
Yes |
2CA: B3+B20, B3+B7; 3CA B1+B3+B7, B3+B7+B20 |
|
| Sony Xperia SP |
C5303 |
4.3 |
5.0.7 |
No |
No |
|
If signal strength is more than about -80dBm, the phone will randomly report either very high (-44dBm) or very low (-120dBm) signal strength
|
Xiaomi
- Some model maybe not working.
| Phone Name |
Model Number |
Android Version |
Cellmapper version |
API 4.2 Support |
Dual SIM |
Support read Bands / Freq |
More info
|
| Xiaomi Mi 4c 32GB |
|
5.1.1 |
5.0.7 |
Partial |
|
Partial |
Reads band in 4G with Qualcomm + root method. Shows nothing without root with new API (blank).
|
Other Phone / Multiple branding
| Manufacture |
Phone Name |
Model Number |
Android Version |
Cellmapper version |
API 4.2 Support |
Dual SIM |
Support read Bands / Freq |
More info
|
| SPRD |
Smart Max 4.0 Plus |
SMART_MAX_4.0_PLUS |
5.1.1 |
|
No |
|
|
|
Windows 10 Mobile (all manufacturers)
- Requirements: Windows 10 Mobile RTM or newer
- Support read Bands / Freq: Yes
- Required 512MB RAM, more than 1GB recommended
Unsupported
- Jolla, you can try but not officiality supported //7.1.2017
- Xiaomi MI MIX - Cell ID API not working //5.1.2017
|